Atomium Mototec 2 100ml in Two-stroke Engine Oil
17.24 €
Atomium Mototec 2 100ml in Two-stroke Engine Oil
Two-stroke engine oil additive
The Atomium Mototec 2 additive with a volume of 100 ml prolongs the life of the engine and increases its effective performance . It also helps to restore and protect the overall engine. This product will serve well in the care of 2-stroke engines, including those that have a separate lubrication system. The additive is intended, for example, for garden mowers, brushcutters, saws or smaller boats.
Key properties of the Atomium Mototec 2 100 ml additive
- Oil additive for 2-stroke engines
- Atomium Active Mototec 2 to extend engine life
- It helps to restore and protect the engine
- Fuel and oil savings
- Vibration and noise reduction
- The lubricant is also suitable for saws, mowers, brushcutters, mopeds or smaller boats
- Volume 100 ml
Instructions for use of the Atomium Mototec 2 additive
- 1. Warm the engine to operating temperature.
- 2. Switch off the engine.
- 3. Carefully mix the vial with the product so that the sediment at the bottom disperses into the entire volume of liquid.
- 3. Add Atomium Mototec 2
If the lubrication system is separate, pour half of the bottle into the oil tank. If the lubrication system is common, pour the product into the fuel tank according to the calculation of 5 ml of product per 1 liter of fuel.
- 5. Immediately after pouring the product, start the engine and let it run for 10-15 minutes.
Other important information:
- After completing the procedure, the technique can be used in the usual mode.
- To maintain the operating characteristics of the engine, it is recommended to perform the following treatment after 30-40 hours of engine operation.
Whole description
Specifications
Usage
Usage
Oil
Motor
Petrol
Season
Season
Winter, summer
Volume
Volume
0.1 l (100 ml)
| Code: | AUPR257119 |
| Warranty: | 24 months |
| Product Number: | 8594181250153 |