APC Smart-UPS 1500VA LCD RM 2U 230V rack-mount, network card

The APC Smart-UPS 1500VA LCD RM 2U 230V rackmount UPS with network card is a line-interactive UPS with a real power output of 1000W and an apparent power of 1500VA. It protects servers and network elements, powering connected devices for 7 minutes and 9 seconds at full load, while at half load the time extends to 25 minutes and 51 seconds. The UPS comes in a 2U format, with dimensions of 89×432×457mm and a weight of 28.58kg, and integrates automatic voltage regulation (AVR) and a clear LCD for instant monitoring of its operational status. Thanks to the pre-installed network card, it offers advanced remote management and monitoring options over a network interface. Its design allows for easy integration into standard server racks.

Stable power and performance

The APC UPS uses a line-interactive topology with a pure sine wave output. Automatic voltage regulation (AVR) corrects undervoltages and overvoltages without switching to battery power, which extends the internal battery's life and protects connected electronics. The backup time at 100% load (1000W) is 7 minutes and 9 seconds, increasing to 25 minutes and 51 seconds at half load (500W).

Battery and protection

Inside is a lead-acid battery that the user can replace while the unit is operating. The typical time to fully recharge the battery is 3 hours. The cold-start feature starts the UPS even without mains power input. Surge protection absorbs energy up to 459J, which reduces the risk of hardware damage during power spikes on the network.

Remote management and monitoring

For management and communication, the UPS is equipped with USB, RS-232, and Ethernet ports thanks to its pre-installed network card. This is used for remote monitoring and configuration over the network. PowerChute Network Shutdown software automates the safe shutdown of virtual machines and physical servers during a prolonged power outage, preventing data loss.

Connectivity and sockets

Four IEC C13 output sockets and two IEC Jumper cables are provided for connecting powered devices. The input uses a standard IEC C14 connector. This configuration ensures flexible connection options for different types of equipment.