AS-series receivers Sxx1 provide a credible sound, a special design based on the ToP-ART concept (Total Purity Audio Reproduction Technology). Direct and short audio paths are symmetrical to the left and right channel, thus minimizing distortion resulting sound distortion or noise during transmission. Rigid base ART (Anti-Resonance and Tough) with a fixed median gives support with high rigidity and effectively damps vibrations. The engineers carefully considered the design, the selection of parts was done using the strictest of criterias and the precise execution also reflects in the pure sound. The sound will remain in its original "rawness", and despite the rich gain, it will always respond as much as possible to the original source.
At low volume, low frequency and high-frequency tones are lost naturally. If you do not like authentic playback sound, and it's not your cup of tea, in that case, there is nothing simpler than the sound to replicate. The front panel is dominated by a volume control and power switch, in addition to that, there are analogue controllers, which fine-tune the tonal scale at their own level. It also includes a new analogue volume control, to control loudness, which means electronic volume allows you to adjust the volume of the desired effect. The opposite is the Pure Direct setting button, when the signal goes the shortest path from input to output, without any modification. The smallest of the mobile driver is used for switching between a pair of speaker sets or plays the sound of both.
The full set of input and output connectors on the amplifier serve every conceivable device to produce spectacular audio. The basis of transmission without compromising quality is certainly digital inputs (optical or coaxial), which brings the sound to an amplifier from game consoles, media players or HD videos directly from your TV. Furthermore, the next six analogue inputs for all other electronics, such as a CD player, tuner, pocket player and so on. To connect the amplifier and turntable with a pick-MM. You can now enjoy listening to gramophone recordings of the amplifier with the latest technologies.
Specifications:
Minimum RMS output power (8?, 20 Hz-20 kHz)
60 W + 60 W (0.019% THD)
Max. output power (4?, 1kHz, 0.7% THD):
95 W + 95 W
Max. dynamic power / channel (8/6/4/2?):
100/120/140/150 W
Attenuation:
210
Input sensitivity / impedance:
Phono (MM): 3.0 mV / 47 k?
CD etc: 200 mV / 47?
The output level/impedance:
CD, etc. 1 kHz, 200 mV Rec Out of 200 mV / 1 to?
8-ohm load Connection: 360 mV / 470 k?
Frequency response:
CD etc: 20 Hz - 20 kHz, 0 ± 0.5 db
CD etc., Pure Direct ON: 10 Hz - 100 kHz, 0 ± 1.0 db
Channel separation (1 kHz / 10 kHz):
CD etc., Shorted input, 5.1 ohm 65 dB / A 50 db
Total harmonic distortion:
Phono (MM) (20 Hz - 20 kHz) Rec Out: 0.03% (2.5 V)
CD, etc. (20 Hz - 20 kHz) Sp Out: 0.019% (50 W / 8 ohm)
Signal / noise ratio (IHF-A Network):
Phono (MM) (shorted input 5 mV): 82 db
CD etc. (Pure Direct ON, shorted input of 200 mV): 99 db
The residual noise ratio (IHF-A Network):
40 microvolts
Characteristics continuous damping control loudness (1 kHz):
-30 dB
Angular misalignment profit (0-99 db):
0.5 dB
Supported audio sampling rate:
Digital input (Coaxial/Optical): 192/176.4/96/88.2/48/44.1/32 kHz
Bit depth PCM digital input (coaxial / optical):
24/16 bits
Connectors:
Digitalální input (optical / coaxial)
6x analog input
Subwoofer Output
USB DC Output
Size:
435 x 151 x 387 mm
Weight:
9 kg
Code: | YM301a1 |
Warranty: | 24 months |
Product Number: | AAS301BL |
Links: | Producer's Website: |