UNI-T Infrared Thermal Imager
UNI-T Infrared Thermal Imager
Thermal camera with two uses
The UNI-T UTi165K infrared thermal camera enables non-contact measurement of body temperature. You will appreciate the thermal imager wherever a large number of people pass, e. g. entrances to shops, medical facilities, schools, companies and more. The ideal measuring distance is one meter (minimum 15 cm), and in addition to one fixed point, you can select three other measuring points. The advantage of the thermal imager is that it can be used as a handheld device, but you can also place it in a tripod (1/4 “thread).
Key features of the UNI-T UTi165K infrared thermal imager
- Measuring range 30–45 ° C with a resolution of 0.1 ° C
- Alerts to a person with an elevated temperature
- Can be used as a handheld device, but can also be mounted on a tripod
- Can be connected to a computer via USB-C
- Light-emitting diodes
- Memory card slot
- One fixed and three selectable measuring points
- Endurance on one charge more than 6 hours
- Field of vision: 56 ° (H) × 42 ° (E)
- Dimensions: 236 × 75.5 × 86 mm
- Weight: 2.2 kg
No risky person will escape the thermal imager
If a person with a body temperature higher than the set limit (37.3 ° C) is caught, you will be notified immediately via the display. The UNI-T thermal imager measures temperatures in the range of 30–45 ° C with a resolution of 0.1 ° C and an accuracy of 0.5 ° C over a distance of one meter.
Everyone can operate the UNI-T UTi165K
Intuitive operation is provided by a total of 10 buttons and operation is facilitated by a 2.8 “display with a resolution of 320 × 240 pixels and three display modes. You connect the thermal imager to a computer via the supplied USB-C cable. The battery promises more than 6 hours on a single charge. You can then charge the battery to full capacity in approximately 4 hours. There is also a function of automatic shut-off after 5/10/30 minutes.
Connection to a computer
The UNI-T UTi165K can be connected to a computer, where you can monitor real-time measurements and evaluate data using the supplied software. Among other things, automatic shooting and saving to the SD card also takes place.
Specifications
Type
Measuring range
Option to switch between °C and °F
Material
Colour
| Code: | ver007 |