TP-LINK MC111CS

A high quality and reliable media converter designed to convert 100BASE-FX fibre to 100Base-TX copper media or vice versa. This converter is intended for use with single-mode fibre with an SC connector. Adopting WDM technology, the MC111CS uses a single fibre cable to transmit and receive data, which will save you half of your cabling costs. It uses a wavelength of 1550nm to transfer data and 1310nm to receive it. For the end device to cooperate with the MC111CS it should work at 1310nm for transferring data and at 1550nm to receive data. The TP-LINK MC112CS media converter is just one of the devices that is compatible with the MC111CS. This module can also be used as a stand-alone device (no chassis required) or with a TP-LINK 19" system chassis.

Parameters and Specifications:
Standards and Protocols:
IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Basic functions:
Supports WDM technology
Half duplex/full duplex mode for FX port
Full-duplex flow control (IEEE 802.3x)
Half-duplex flow control (Backpressure)
Link Fault Passthrough and Far End Fault minimise loss due to interrupted connections
Extends the range of optical cables up to 20km
Ports:
1 port 100M SC
1 port 100M RJ45 (Auto MDI/MDIX)
WDM TX:
1550nm
WDM RX:
1310nm
Network Media 10BASE-T:
UTP Category 3, 4, 5 (max. 100m)
EIA/TIA-568 100 Ω STP (max. 100m)
1000BASE-T Network Media:
UTP Category 5, 5e cable (max. 100m)
EIA/TIA-568 100 STP (max. 100m)
1000BASE-FX Network Media:
Single-band optical cable
LED Indicators PWR, FDX/Col, Link/Act, SPD
Dimensions:
94.5 x 73 x 27mm
Power Supply:
External power adapter
Safety and Issues:
FCC, CE
Operating Environment:
Operating temperature: 0-40 ?
Non-operational temperature: -40-70?
Operating humidity: 10-90% non-condensing
Non-operational humidity: 5-90% non-condensing