Need to put something in your home on the wall, but don' t know how? Try the adjustable Tesa adhesive nail, which is suitable for tiles and metal. You can easily stick the nail and you can start using it immediately. There are two pieces in the package, each of which can hold a load of up to 4 kilograms. Thanks to the Powerstrips technology, you can remove the hook from the wall without knowing that it has ever been there. For placement in another place, just buy a suitable replacement adhesive strip.
The product can be easily glued, removed, and then reused. The great advantage of the Tesa adhesive nail is the possibility of attaching objects without damaging the surface. You will avoid unnecessary drilling, which will significantly reduce noise, clutter and save your time. The product is not suitable for wallpapers, plaster, copper, brass, painted paper, non-stick and porous surfaces.
Clean the surface before application. Use a silicone-free cleaner (reduces stickiness). Allow the clean surface to dry.
Remove the adhesive strip and stick it vertically on a clean and dry surface.
Press the strip firmly for 5 seconds to increase adhesion and effectiveness.
Remove the cover foil from the strip and stick the nail so that the upper corners of the nail and the strip are aligned (above the red line).
Now you need to press the TESA nail to the surface for 5 seconds at the top. The same goes for the bottom.
Slide the red stops and select the desired mandrel position. By sliding the stop down, you will secure the mandrel again, thus achieving a perfect alignment of the suspended things.
Holds items up to 4 kg. Using 2 nails will increase the load capacity to 8 kg. The TESA adhesive nail is therefore ideal for attaching various pictures, shelves or clocks.
Grasp the nail head and slowly pull the adhesive strip along the wall. The adhesive is released and the nail is removed.
Code: | TESAP037 |
Product Number: | 77767-00007-00 |
Links: | Producer's Website: |