This single port Gigabit PoE injector PoE30G-AT from Tenda Technologies supports standard IEEE 802.3af (15.4W) and 802.3at (30W). This enables simultaneous transmission of power and data to the active element via a single Ethernet cable category 5 or greater. This eliminates the need to access an electrical outlet near the active device. The injector is primarily used to power all the devices that support PoE standard 802.3af and 802.3at such as wireless access points AP, IP cameras, IP phones, etc.
The Tenda PoE30G extra-AT can automatically detect whether the powered device supports PoE supply. If it does not, the PoE30G-AT sends data to the device only while the power is activated to prevent irreversible damage to the powered device! The transmission speed LAN ports are 10/100/1000 Mb/s full-duplex. The maximum supplied power is 30 watts.
Package contents
1 x Tenda PoE30G-AT
1 x Quick Installation Guide (CZ, SK, PL)
1 x Power Cord
Certificates and Manuals
CE certification (Certificate of conformity)
Declaration of Conformity (Declaration of conformity)
Manuals
Complete Manual setting (EN)
WDS mode settings on the router with Broadcom chipset Tenda
Firmware
CAUTION: First check your current firmware version, then choose the correct version of the firmware download. If the drive firmware version is recorded incorrectly, any complaints will not be considered.
It is recommended to upgrade the firmware using an Mozilla Firefox or Internet Explorer internet browser.
Code: | NU439a |
Warranty: | 36 months |
Product Number: | PoE30G-AT |
Links: | Producer's Website: |