Tempish Viber 80 size 40 EU / 259 mm
Don't like the alternatives?
Choose from the full offer
Tempish Viber 80 size 40 EU / 259 mm
The Tempish Viber 80 freestyle skates are suitable for beginners and experienced skaters with medium to wide feet. The skate skeleton is well ventilated, ventilation reaches the foot thanks to the holes on the bottom of the shoe and the ventilated liner, which contains holes all around its perimeter, including the tongue. In the joint of the skate is used a bolt with a special nut and washer, thanks to which the cuff is replaceable and can be tightened if necessary, also guarantees a longer life than the joint rivet. The upper self-locking buckle is metal. The belt slides into the skeleton to prevent it from catching on the other skate during slalom and freestyle. The ankle strap is fitted with a one-stage micro-strap with very comfortable tightening and loosening thanks to the ratchet system. The plastic protectors on the outside of the skates are replaceable. Lace holes are fitted with strength metal rings to protect the laces and improve tightening. Thanks to the use of waxed laces with a width of 10 mm, it is easier to gradually tighten the laces and more effectively close the skeleton of the skate to the foot.
Key features of the roller skates Tempish Viber 80, sized. 40 / 259 mm
- Suitable for beginners and advanced
- Designed for freestyle skating
- Fits great on medium and wide feet
- Well ventilated liner and double skeleton
- Replaceable cuff with longer life
- Metal buckle and comfortable ratchet tightening
- Waxed laces for tightening
- Comfortable anatomical liner with elastic elements
- Damping silent block in the heel section
- Solid CNC chassis reinforced with space frame, strong, stable and precise with lateral and longitudinal adjustment
- Elasticated neoprene in the finger area for increased comfort
- Anatomical insole
Stable and solid chassis
The chassis of the Tempish Viber 80 roller skates is made by CNC and is heavily reinforced with a spatial design, very strong, stable and precise. This is a proprietary Tempish design and construction. The chassis is attached to the shoe by 2 central screws. The chassis can be adjusted laterally and longitudinally. The hollow weight-reducing lugs have a diameter of 8mm and are mounted on the inside of the left skate and on the outside of the right skate to prevent the screws from loosening when driving.
Liner designed for maximum comfort and control
The Tempish Viber 80 liner skate is ventilated, has holes all around its circumference and is reinforced with PVC in the back. There is elastic neoprene in the toe area for added comfort. At the back there is a strap with the Tempisch logo for convenient carrying of the skates. In the Achilles tendon area, the liner is lowered and shaped in a V-shape, which enhances manoeuvrability and mobility and therefore easier to perform freestyle elements. The liner has cut-outs in the ankle flexion area stitched over with elastic neoprene, which achieves optimal anatomical disposition of the liner while maintaining its stiffness. It is equipped with a loop for the first row of laces, which makes the position of the liner in the skeleton even more solid. A material is used on the lower part of the skeleton that is less slippery.
Dampens vibration and shock
The shoe has an anatomical insole with a thickness of 3 mm, which is comfortable enough without being too soft. Under the liner in the heel section, the shock-absorbing silent block made of TPR material, which perfectly absorbs vibrations and shocks, is quite thick, soft and comfortable. The tongue of the liner is sufficiently stiff and thick, consisting of 2 parts, so it perfectly follows the instep of the foot. The tongue holds the position well thanks to the use of a tightening elastic.
Sport load bearing capacity:
4
Skeleton: High-impact plastic Inner Material:
Fine Nylon, absorbent microfiber
Chassis dimensions:
235.5 mm
Type of wheel:
Freestyle SHR PUC
Caster dimensions:
76 × 24 mm
Maximum load:
100 kg
Specifications
Roller skate type
Usage
Performance category
Size
Wheels and bearings
Features
Material
Colour
| Code: | SPTte728 |
| Links: | Producer's Website: |
| Manufacturer information |
Tempish s.r.o., bratří Wolfů 495/16, 779 00 Olomouc, CZ, [email protected], +420 585 313 377 
|