The Schabus Gas Alarm GX-B1 will help you determine if a natural gas, methane or propane-butane leak has occurred in your home. This device simply plugs into a wall socket and has highly sensitive sensors to help you recognise even a slight change in the air. Safely avoid damage to your health and property with this smart device.
Plug the Schabus GX-B1 into a socket at the recommended distance from your gas appliance. After 3-5 minutes, the detector warms up to operating temperature and if it does not trigger an alarm within 20 seconds, your appliance is OK.
The manufacturer suggests that you not disconnect the detector from the socket or connect other electrical devices. In addition, you should avoid handling fire and filter the contaminated area thoroughly. If the gas is still leaking, close the main gas shut-off valve and contact a certified specialist for safety.
Parameters and specifications:
Recommended placement for methane detection:
Height: 15-30cm below the ceiling
Distance: <4m from the appliance
Suggested location for propane-butane detection:
Height: 15-30cm above the floor
Distance: <4m from the appliance
Cover:
IP 20
Power supply:
From a 230V network
Use:
For the home
Dimensions:
118 × 60 × 44 mm
Package contents:
Detector
Operating Instructions
Code: | VC438k |
Product Number: | 752224 |