Reviews Thermal Grizzly Conductonaut (1g)
Interested in reviews of Thermal Grizzly Conductonaut (1g)? It got 4.9 out of 5 stars from our customers. Find specific customer reviews of Thermal Grizzly Conductonaut (1g) below. We will appreciate if you also share your experiences with Thermal Grizzly Conductonaut (1g) after purchasing.
Thermal Grizzly Conductonaut (1g)
In stock 1 pcs
10.90 €
Add to Cart
Help and manuals
46
Reviews 37
Michal, Martin
Rated 16/12/2021, variant Thermal Grizzly Conductonaut (1g)
Verified purchase
Here there is nothing to talk about absolute TOP performance incomparable with classic hot conductive paste.
Cryonaut (here I was lucky to find qualitatively different saras) or MX4 is absolutely not up to this. Especially in combination with a water block. A big difference can be felt in the air.
I recommend buying the Thermal Grizzly Shield. The same service can be done by a liquid electrical harness, but while it's here: -) At least you can be sure that if you "miss" a bit more, you won't damage the smd around the GPU or CPU during DELIDE.
I really recommend the application to more experienced users. It's not like a paste, that the cocksucker bites a lot of it and it weakens the cooler. Just a little bit, don't forget to apply to both contact surfaces, i.e. the heat sink and the GPU/CPU core/heatspreader.
Then you don't have to cry here that you have it all over the board. In 99.9% of cases of malfunctioning of the liquid metal is a failed/improper application.
Vodiva, but what would we want. Physics won't let go.
Beware of aluminium! There are plenty of warnings on the packaging in big letters, but I still see that there are experts who chop it on the aluminum cooler, which is of course its final stop on the lifetime.
0 ×Report
Pavel, Havlíčkův Brod
Rated 19/11/2021, variant Thermal Grizzly Conductonaut (1g)
Verified purchase
Never again. I degreased the processor, applied a small amount that can't be smeared on the processor doesn't stick. It's acting like a drop of water. It spilled out of the processor like mercury into a bunch of little balls all over the motherboard. The PC was suddenly shutting down, restarting and would not turn on. I had to clean the motherboard, blow off this liquid metal and buy a normal hot water paste.
0 ×Report
Jakub, Stropkov
Rated 13/02/2021, variant Thermal Grizzly Conductonaut (1g)
Verified purchase
Insufficient warning that it is not to be used on aluminium radiators. Which I only figured out on the warning in the product packaging.
0 ×Report
Customer, Karlovy Vary
Rated 22/01/2021, variant Thermal Grizzly Conductonaut (1g)
Verified purchase
Good conductivity
When applying it to the processor it needs caution because it is too liquid
0 ×Report
Radek, Hrdějovice
Rated 26/11/2020, variant Thermal Grizzly Conductonaut (1g)
Verified purchase
It's definitely better than paste. The temperature of the processor has gone down by 5 or 10 degrees and the graphics have better temperatures and higher gpu clock speed.
0 ×Report
Martin, poprad
Rated 17/11/2020, variant Thermal Grizzly Conductonaut (1g)
Verified purchase
It works
0 ×Report
Jakub, Pardubice 12
Rated 31/10/2020, variant Thermal Grizzly Conductonaut (1g)
Verified purchase
Super price
Good quality
0 ×Report
Karel, Vestec
Rated 11/10/2020, variant Thermal Grizzly Conductonaut (1g)
Verified purchase
The temperature dropped from 83 to 68.
It was enough for both CPU and GPU in the laptop
none
0 ×Report
Martin, Kolín
Rated 23/09/2020, variant Thermal Grizzly Conductonaut (1g)
Verified purchase
Compared to MX-4, 6-9°C difference without load (i9 9900k 5Ghz) - 31°C, 24.5°C
The app is pretty cool, but I recommend checking out YT
Conductive
0 ×Report
Pavel, Třebíč
Rated 17/08/2020, variant Thermal Grizzly Conductonaut (1g)
Verified purchase
Not suitable for aluminium radiators, oxidizes in a moment
0 ×Report