Reviews ROJAPLAST Regál kovový 180 × 90 × 40 cm, 5 polic
Interested in reviews of ROJAPLAST Regál kovový 180 × 90 × 40 cm, 5 polic? It got 4.8 out of 5 stars from our customers. Find specific customer reviews of ROJAPLAST Regál kovový 180 × 90 × 40 cm, 5 polic below. We will appreciate if you also share your experiences with ROJAPLAST Regál kovový 180 × 90 × 40 cm, 5 polic after purchasing.
ROJAPLAST Regál kovový 180 × 90 × 40 cm, 5 polic
In stock > 5 pcs
29.90 €
Add to Cart
Jaroslav, Tábor
Rated 29/05/2024, variant ROJAPLAST Regál kovový 180 × 90 × 40 cm, 5 polic
Verified purchase
Assembly is not quite for everyone. The installation is visually simple, but it requires a grif. More complicated assembly is compensated by a very low price and good load capacity. It is more likely that my problem with the connection of the lower and upper modules was self-inflicted by putting the highest shelf of the lower module all the way up - it must be on the third connection from the top. Once assembled, the rack looks good. The picture guide is acceptable but too small. Some details should be bigger - mainly the connection of the upper and lower part. I fumbled there. You will need a rubber mallet and a sturdy knife or screwdriver for assembly. After you have measured the height positions of the shelves, it is convenient to slightly widen the places for inserting the tabs (cut slots) on the uprights from both sides (input and output slots), so that you insert a suitable tool into it. I used a knife, a screwdriver of the appropriate size will also work. This will make it easier to insert the tab into the first entry hole. Care must be taken to ensure that the tongue also penetrates the outlet slot when installing the horizontal beams. Sometimes you have to repeat the insertion and point the tip of the tab a little so that it goes into the other slot as well. If the tabs only go into the first hole, the shelf will be functional, but it will not be precise. This could be a problem when loaded with the maximum allowed weight. Reinforcements in the center of the shelves are easy to install, but you must not forget to secure them by bending the tip of the tongue after inserting it into position, in order to avoid the possibility of spontaneous loosening of the reinforcement. This joint is not " self-locking" as with horizontal beams. For me, it took the first two shelves out of the 5 units I bought before I stopped worrying: -).
Price
carrying capacity
more complicated assembly
0 ×Report