If you've decided to guard the security of your home with Perenio equipment, we have a new unit you shouldn't miss. This is an open door/window sensor that will immediately alert you to unauthorized entry into your home. In order to operate the sensor, you need to own a control gateway, which will send alerts to your smartphone. The free Perenio open door/window sensor management app is available for both iOS and Android.
You can install the Perenio open door/window sensor in the interior of any property (house, cottage, office or warehouse) on a conventional, roof or French window or entrance door or garage door. A magnet is located inside the sensor. If it moves more than 20-30 mm away from the main part and returns to its original state, the device immediately sends a push-notification to your smartphone. The Perenio safety sensor is charged by a single battery, which will need to be replaced after approximately two years of operation.
Communication technology:
ZigBee 3.0 (IEEE 802.15.4)
Power supply:
1× CR2032 (125 mAh, 3 V) with a lifetime of up to 2 years
Installation:
for indoor installation only
on the edge of the door/window opening (3M mounting tape)
Dimensions:
sensors: 45 × 30 × 19 mm
magnet: 45 × 15 × 19 mm
Weight:
24,2 g
Operating temperature:
0 - 45 °C
Operating Humidity:
10 - 85% (non-condensing)
| Code: | PRN21_01 |
| Extended Warranty: | +96 months |
| Product Number: | PECWS01 |
| Links: | Producer's Website: |