Olympia TB 1280

Thermal binder Olympia TB 1280 combines up to 200 sheets of paper into a thermal map with a maximum thickness of 20 mm. It is equipped with overheating protection and switches off automatically after 90 minutes of inactivity. When the appliance is not in use and the cooling section is inserted, the opening in the thermowell is protected by a cover to prevent dust from entering the heating element. Thanks to optical and acoustic signalling, it is very easy to use and also highly error-proof. When the unit is switched on, the red Power light will illuminate and the thermal binder will start to heat up automatically. After approximately 3 minutes of warm-up, the Bind light stops flashing and turns green. Olympia TB 1280 beeps to indicate that it is ready for use.

The Olympia TB 1280 is designed for A4 paper

Once it is The Olympia TB 1280 thermal binder is ready to use, you insert the sheets of paper into the connecting thermal envelope, pull out the sliding cooling part and insert the thermal envelope with the papers with the closed side into the opening. You then press the Counter button which activates the linking process, this takes about a minute. After the process is complete, the machine will beep 3 times and the Bind light will turn green. You then place the thermal envelope with the papers in the cooling rack on the back, where you leave it to cool for at least 10 minutes. Thermal binder The Olympia TB 1280 is designed for A4 paper.