Module for POE (Power Over Ethernet), 5V-48V, LED, Gigabit

A passive adapter made for the Power Over Ethernet (POE) system. This adapter is used to supply power from the round power connector to the unused UTP cable pair, and therefore you can transmit both data and power supply through one cable.
On the other side, you can remove the power supply of the UTP cable with the same campanion part, or you can use a compatible device (WRAP, RouterBoard). Compared to the active adapter, the passive one differs in having no further components. It can be used with WRAP devices, or other RouterBand that support a passive POE. The module is equipped with an LED for a visual inspection operation.

Parameters and specifications:
Current supported value limit range:
0.5A - 1.5A

Supported values voltage limit range:
5V - 48V

Power supply input:
DC jack 2.1mm

Data:
1.2 & 3.6 & 4.5 & 7.8

Power supply:
RJ45 pins 4.5 (positive)
RJ45 pins 7.8 (negative)