Metabond SPIRIT for 3.5t Engines with START&STOP System

Keep your pet's engine in good shape with state-of-the-art Metabond Spirit for surface finishing using nanotechnology. Heat treatment of metal surfaces will reduce friction, significantly extending engine life. This product is designed for SAE 0W-20 or less (0W-16, 0W-8 etc.) engine oils and also for cars up to 3.5 tonnes with internal combustion engines with Start-Stop system. It can be used for diesel, gasoline, LPG and CNG engines. Metabond Spirit oil additive does not contain sulfur, phosphorus, chlorine, teflon, ash or zinc and is therefore completely non-corrosive. It does not react with the oil and thus does not change its properties, it only creates a thin film and thus ensures ideal conditions for the effect of the engine oil even under extreme loads. This is to increase engine power and reduce fuel consumption.

Key features of the Metabond Spirit engine

• Additive using nanotechnologies
• Only for cars up to 3.5 t with internal combustion engines with Start - Stop system (diesel, petrol, LPG, CNG)
• For motor oils with specification SAE 0W-20 and less (0W-16, 0W-8 etc.)
• It is miscible with all mineral but mainly synthetic motor oils and ester-based motor oils
• Guaranteed to reduce friction by up to 60%
• 5-10% increase in engine power
• Engine life extension
• 5 - 15% reduction in fuel consumption
• Reduction of exhaust emissions
• Significantly reduces engine wear during cold starts
• Simple application and guaranteed effect

Follow the Metabond Spirit application procedure

One 250 ml package treats 4 to 8 liters of engine oil. For engines with a higher oil content, use two packages. Use only with oil specified by the car manufacturer. The application is absolutely simple and absolutely anyone can handle it. Heat the packaging to approximately 30 ° C (for example in warm water or on a radiator). Shake well and add the contents of the pack to the engine oil. Metabond Spirit is recommended to be added to a new oil when changing regularly. It can also be added to oil that has already been changed, up to a maximum of three thousand kilometers since the oil change. It is recommended to add to heated oil. Then let the engine idle for 5 to 10 minutes.