METABOND ECO for engines up to 3.5t 250ml

Do not shorten the life of the engine and give your car a first-class care in the form of Metabond ECO. This metal surface finisher in combustion engine contains ceramic nanoparticles (h-BN).And how does its application affect your engine? Metabond ECO significantly reduces friction and improves lubrication. By refining metal surfaces, friction will be reduced, significantly prolonging engine life.It can be used for all passenger cars and deliveries up to 3.5 tons with combustion engines (both atmospheric and supercharged). 

Key features

• Volume 250 ml
• Reduce friction by up to 60%
• Increased engine power by 5-10%
• Extending engine life
• Reduce fuel consumption by 5-15%
• Reducing exhaust emissions
• It significantly reduces engine wear during cold start

Use of Metabond ECO

The product should be heated to a temperature of approximately 30°C - In warm water or lay on a radiator. After thorough shaking, pour it into the engine oil. This procedure is recommended to repeat each time the engine oil is changed - up to a maximum of 3,000 miles from the change. Add Metabond ECO ideally to heated oil and let the engine idle for 5-10 minutes after application. One pack - 250 ml, is sufficient to treat 4-8l of engine oil. Remember to keep the oil specification specified by the car manufacturer.

• Metabond ECO does not contain chlorine, sulphur, phosphorus or PTFE (Teflon). It is fully filterable. It does not react with oil or change its properties. It does not cause corrosion of non-ferrous metals.

How to store

Store Metabond ECO in dry conditions at -10 to +40°C. Once opened, use it for up to 2 years.
Additional information:
Color Code ASTM-D 1500-07: 7.5 ASTM
Kinematic viscosity at 40°C, STN EN ISO 3104: 1996: 200 mm2/s
Kinematic viscosity at 100°C, STN EN ISO 3104: 1996: 20 mm2/s
Acid number (TAN) ASTM D 664-07: 2.5 mg KOH/g
TBN total ASTM D 4739-08: 21 mg KOH/g
Corrosive effect on copper plates (100°C, 1 hr.) EN ISO 2160:2000: 1a - degree of corrosion