The latest and most efficient lighting technology. Their service life is remarkable - usually between 20,000 and 50,000 hours. LED lights also achieve high brightness with minimal energy consumption. A 9W LED bulb is equivalent to a 60W halogen lamp.
Continue
LED technology
At the core, it is a semiconductor electronic component that has the ability to emit light or infrared and ultraviolet radiation. This makes it different from other diodes. Officially, it is called a light-emitting diode, or LED for short.
Advantages of LED technology
- About ten times more efficient than a normal light bulb
- More resistant against vibration and shocks
- Can change light without filters
- Service life several times longer than other lighting sources
- Does not contain mercury
- Switching it on and off repeatedly has no negative effects on its service life
- The diode can be very small and can be fitted anywhere
Socket
The base part of the bulb that connects to the lamp. There are several types of fittings:
|
|
E27
27 mm in diameter, this is one of the most common fittings. It’s used by almost every light source with a voltage of 230 V. You can usually find this type in ceiling or wall lighting fixtures or chandeliers.
|
|
|
E14
Has the same screw as E27. They differ only in diameter, which in this case is 14 mm. The operating voltage is 230 V. Commonly used in smaller lamps, spot lights, and candelabra and chandeliers consisting of a large number of light bulbs.
|
|
|
GU10
This socket has no screw. Instead, it has two pins with a diameter of 5 mm that you snap into the lamp and twist slightly. Its operating voltage is 230 V and this type is most commonly encountered in ceiling lights, spot lights, or in bathroom and lavatory fixtures.
|
|
|
G4
A threadless socket, it features two pins 4 mm apart that you snap into the lamp. Its operating voltage is 12V. Most commonly found in kitchen counter lighting fixtures, low ceilings, or bars.
|
|
|
GU5.3
Another threadless socket, it features two pins 1 mm in diameter and spaced 5.3 mm apart. The socket is designed for 12V. Mainly used in smaller lamps and spot lights.
|
|
|
G9
A threadless socket similar to GU10. It has two pins that snap into the lamp. This is the smallest size for 230V LED bulbs. Most commonly used in ceiling fixtures, spot lights, or in bathroom and lavatory fixtures.
|
|
|
R7s
A linear, tube-shaped socket inserted into a fork with a pitch of 78-189 mm. Its operating voltage is 230 V.
|
|
|
GU4
A threadless socket similar to other GU types. You’ve got two pins 1 mm in diameter and spaced 4 mm apart that you simply snap into the lamp. The pins must be at least 6 mm long.
|
|
|
GX53
This type is used in ceiling fixtures, floor lamps, or footings. The distance between the pins is 53 mm.
|
General comparison chart
This chart shows estimated power savings when using different types of light bulb technology. In direct comparison, LED is clearly the best option.
| Brightness |
220 lm |
400 lm |
700 lm |
900 lm |
1300 lm |
| Light source type |
|
|
|
|
|
| Incandescent bulb |
25 W |
40 W |
60 W |
75 W |
100 W |
| Halogen bulb |
18 W |
28 W |
42 W |
53 W |
70 W |
| Energy-efficient light bulb |
6 W |
9 W |
12 W |
15 W |
20 W |
| LED bulb |
4 W |
6 W |
10 W |
13 W |
18 W |
Buy with code
ALZADNI10
50.31 €
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získajte zľavu 10 % s kódom ALZADNI10. Kliknite a kód sa uplatní automaticky.
