The Intel PRO/1000 PT network card uses modern PCI Express to deliver high-speed data over advanced Gigabit Ethernet connections. Dedicated PCI Express bandwidth provides full power to each of the four contained ports without bus sharing. The Intel PRO/1000 PT increases efficiency in multi-processor systems by balancing their loads. Moreover, integrated Intel I/O Acceleration allows for faster processing on the new Intel Xeon server.
Specifications:
General:
Connectors: 4x RJ-45
Standards: 10BASE-T, 100BASE-TX, 1000BASE-T
Connection: CAT5 twisted pair (UTP)
Adapter features:
Intel PROSet Utility and Intel PRO Intelligent Install
Intel lead-free technology
Auto-negotiation, full-duplex
Intel I/OAT
Integrated media access control (MAC) and physical layer (PHY)
Includes full-height bracket
RoHs
Cable distance: 100m in CAT5 for 100/1000Mb/sec
Network Management:
Wired for Management (WfM) baseline v2.0
Supports DMI 2.0, Windows Management Instrumentation (WMI) and SNMP-manageable SMBus
Remote Installation Services (RIS)
Diagnostics (loopback, testability, PHY register access)
Advanced Configuration and Power Interface (ACPI) 1.0 power management
Wake on LAN support over PCI Express
Network Operating Systems (NOS) software support:
Microsoft Windows Server 2003, Enterprise, Datacenter (32 and 64-bit)
Microsoft Windows 2000
Red Hat Linux 2.4x or later (32 and 64-bit)
FreeBSD 4.x or later
Novell Netware
Sun Solaris x86, OS 8 and later
SCO Open Server 5, OpenUNIX 8
Advanced software features:
Adapter fault tolerance (AFT)
Switch fault tolerance (SFT)
Adaptive Load Balancing (ALB)
Fast EtherChannel (FEC)
Gigabit EtherChannel (GEC)
Support for scaling up to eight connections
Supports up to 4 separate groups
IEEE 802.3ad (link aggregation control protocol)
PCIe Hot Plug/Active peripheral component interconnect (PCI)
IEEE 802.1Q VLANs
IEEE 802.3 (z, b, u, x) flow control
TCP checksum offload - transmission control protocol (TCP), user datagram protocol (UDP), Internet protocol (IP)
IEEE 802.1p
TCP segmentation/large send offload Interrupt moderation
Technical features:
Data transmission speed: 10/100/1000Mb/sec
Bus type: PCI Express x4 1.0a (works in x16 x8 and x4 slots)
Bus speed: 10 Gb/sec unidirectional, 20Gb/sec bi-directional
Supports SPI EEPROM and EEPROM
Interrupt levels: INTA, INTB, INTC, INTD
Supports IEEE 802.3ab
Hardware Certifications: FCC B, UL, CE, VCCI, BSMI, CTICK, MIC
Controller: Intel 82571GB
Typical power consumption: 12,096W ([email protected])
Operating temperature: 0-55°C
LED: 4 (1/port, link and speed) solid and blinking
Dimensions: 16.77 x 6.89 x 8.00 (DxWxH)
Code: | NR133f |
Product Number: | EXPI9404PTLBLK |
Links: | Producer's Website: |