HP ProCurve 2530-48G PoE

This HP 48-port RJ-45 high-quality switch supports a bit rate of up to 1 Gb/s and Power over PoE. It also has four Gigabit SFP ports and a Dual-personality port. It is especially suitable for connecting corporate PCs and remote components that use PoE. This has the support of almost all security, configuration and communication protocols to enable maximum utilization of the network elements.
You can place it in a 19-inch rack along with the other elements of your network. For smooth transmission of data, this model has an ARM9 processor at 800MHz and a memory capacity of 128 megabytes DDR3. The switch can be configured via the onboard serial console port via the command line, web browser or via the configuration menu.
Specifications:
Ports:
48 x RJ-45 10/100/1000Mpbs (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE +)
Duplex: 10Base-T/100Base-TX (half/full), 1000Base-T (full only)
Media type: Auto-MDIX
4 x SFP 1000Mps
1 x dual personality port (RJ-45 or Micro USB)
1 x RJ-45 console port
Cabinet installation:
Standard: EIA
Size: 19 inches
Hardware
Processor: ARM9 800MHz
Flash: 128MB
Operating: 128MB DDR3
Buffer Size: 3 megabytes (dynamically allocated)
Delay (LIFO, 64B packets):
1000Mb: <2.3 microseconds
Switching Capacity:
104Gb/s
Data rate:
77.3 million packets/sec
General protocols:
IEEE 802.1D MAC Bridges, IEEE 802.1p Priority, IEEE 802.1Q VLANs, IEEE 802.1s Multiple Spanning Trees, IEEE 802.1 watts Rapid Reconfiguration of Spanning Tree, IEEE 802.3 Type 10BASE-T, IEEE 802.3ab 1000BASE-T IEEE 802.3ad Link Aggregation Control Protocol (LACP) IEEE 802.3af Power over Ethernet, IEEE 802.3 at Power over Ethernet Plus; IEEE 802.3az Energy Efficient Ethernet, IEEE 802.3 x Flow Control; RFC 768 UDP, RFC 783 TFTP Protocol (revision 2) RFC 792 ICMP, RFC 793 TCP, RFC 826 ARP, RFC 854 TELNET, RFC 868 Time Protocol, RFC 951 BOOTP, RFC 1350 TFTP Protocol (revision 2) RFC 1542 BOOTP Extensions, RFC 2030 Simple Network Time Protocol (SNTP) v4, RFC 2131 DHCP
Network Management:
IEEE 802.1ab Link Layer Discovery Protocol (LLDP) RFC 1098 A Simple Network Management Protocol (SNMP) RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events); ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED); SNMPv1/v2c/v3
Consumption:
Maximum: 476W
PoE power: 382W
Unloaded: 40.1W