HP 2530-24G PoE

This 24-port RJ-45 high quality switch from HP supports data rates of up to 1Gb/s and power through PoE. It also has four Gigabit SFP ports and a Dual-personality port. It is especially suitable for connecting corporate PCs and remote components that use PoE. This has the support of almost all security, configuration and communication protocols to enable maximum utilization of this network element.
Along with the other elements of your network, you can place it in a 19-inch rack. For smooth transmission of data this model has an ARM9 processor at 800MHz and a 128MB DDR3 memory. The switch can be configured via the onboard serial console port via the command line, web browser or via the configuration menu.
Specifications:
Ports:
24x RJ-45 10/100/1000Mpbs (IEEE 8023 Type 10BASE-T, IEEE 8023U Type 100BASE-TX, IEEE 8023ab Type 1000BASE-T, IEEE 8023AT PoE +)
Duplex: 10Base-T/100Base-TX (half/full), 1000Base-T (full only)
Media type: Auto-MDIX
4x SFP 1000Mps
1x dual personality port (RJ-45 or Micro USB)
1x RJ-45 console port
Cabinet Installation:
Standard: EIA
Size: 19 inches
Hardware
Processor: ARM9 800MHz
Flash: 128MB
Operating: 128MB DDR3
Buffer Size: 1.5MB (dynamically allocated)
Delay (LIFO, 64 B packets):
1000Mb: < 2.3 µwith
Switching Capacity:
56Gb/s
Data Rate:
41.6 million packets/sec
General Protocols:
IEEE 8021D MAC Bridges, IEEE 8021p Priority; IEEE 8021Q VLANs, IEEE 8021s Multiple Spanning Trees, IEEE 8021 watt Rapid Reconfiguration of Spanning Tree; IEEE 8023 Type 10BASE-T, IEEE 8023ab 1000Base-T, IEEE 8023ad Link Aggregation Control Protocol (LACP), IEEE 8023af Power over Ethernet, IEEE 8023AT Power over Ethernet Plus; IEEE 8023AZ Energy Efficient Ethernet, IEEE 8023x Flow Control; RFC 768 UDP, RFC 783 TFTP Protocol (revision 2) RFC 792 ICMP, RFC 793 TCP, RFC 826 ARP, RFC 854 TELNET, RFC 868 Time Protocol, RFC 951 BOOTP, RFC 1350 TFTP Protocol (revision 2) , RFC 1542 BOOTP Extensions, RFC 2030 Simple Network Time Protocol (SNTP) v4, RFC 2131 DHCP
Network Management:
IEEE 8021AB Link Layer Discovery Protocol (LLDP) RFC 1098 A Simple Network Management Protocol (SNMP) RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events); ANSI/TIA -1057 LLDP Media Endpoint Discovery (LLDP-MED); SNMPv1/v2c/v3
Consumption:
Maximum: 247W
PoE power: 195W
Unloaded: 25.2W