HPE 1810-24 v2

Compact switch designed to expand the Ethernet network in small and medium businesses. Its economical dimensions allow it to be placed virtually anywhere (on the wall, on the table, under the table). It does not require special installation in standardized Rack cabinets. The cooling fan is often a source of problems, so a new cooling has been used, which goes without a fan . This has greatly reduced the risk of overheating, dust and water condensation. You can also use a user-friendly web interface to manage and set the switch.
The switch provides 22 RJ-45 ports supporting 10/100 Mbit / s local area network traffic, two Gigabit RJ-45 ports and two SFP ports for connection to other important network elements. Automatic full / half duplex resolution. The Quality of Service ( QoS) technology takes care of the priority setting of transmitted data types. Surely, Auto-MDIX technology will automatically recognize on all ports whether it is a direct or crossed cable. A comprehensive overview of the status, activity and speed of the connected devices provides a clear LED display with indicators for each port.
Parameters and Specifications:
Supported network standards:
IEEE 802.3 (10Base-T)
IEEE 802.3u (100Base-TX)
IEEE 802.3ab (1000Base-T Gigabit Ethernet)
IEEE 802.1p Priorities
IEEE 802.1Q VLANs
IEEE 802.1W Rapid Spanning Tree Protocol
IEEE 802.3 Link Link Aggregation Control Protocol (LACP)
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.3x Flow Control
Interface:
22x RJ-45 (10/100 Mbit / s)
2x RJ-45 (10/100/1000 Mbit / s)
2x SFP (10/100/1000 Mbit / s)
Hardware:
RAM: 128 MB
Flash: 8 MB
Packet buffer: 512 KB
Waiting time:
At 100 Mbit / s: <3.4 μs (64-byte packets)
Address table size:
8000 Mac records
Routing / Switching Capacity:
12.4 Gbit / s
Data stream:
up to 9.2 million packs / s
Message features:
Web browser
Consumption:
Maximum: 22 W
Dimensions:
329.9 x 173 x 43.9 mm
Weight:
1 kg