WYBOT S2 Solar Automatic Cordless Robotic Pool Cleaner with Docking Station and Solar Charging
WYBOT S2 Solar Automatic Cordless Robotic Pool Cleaner with Docking Station and Solar Charging
The WYBOT S2 Solar automatic pool cleaner with docking station and solar charging removes dirt and debris from in-ground pools with a recommended area of up to 50m². Measuring 25×40×39cm and weighing 8.5kg, the device runs on a Li-Ion battery, meaning it requires no power cable connection during its cleaning cycle. Three integrated motors and a suction flow rate of 14m³/h ensure thorough cleaning of the floor, walls, and waterline. A navigation system featuring a gyroscope, depth sensor, and sonar guides the device around the pool.
Key features of the WYBOT automatic robotic cordless pool cleaner with docking station and S2 Solar charging
- Solar station charges the device using solar energy
- Li-Ion battery provides up to 2.5 hours of run time
- Three motors with a total output of 90W power the cleaner at speeds of 10m/min
- Double filtration combines a 180µm filter basket with a 25µm foam filter
- WYBOT mobile app offers a choice of seven cleaning modes
- Sensor system utilises a gyroscope, depth sensor, and sonar
- Device cleans the pool floor, walls, and waterline
Solar charging
This cordless cleaner uses a solar charging station to power up. Once the cleaning cycle is complete or the battery runs low, the robot automatically returns to the charging station. The Li-Ion battery provides up to 2.5 hours of operation, while a direct charge takes approximately 3 hours. The device moves at a speed of 10m/min during cleaning.
Double filtration system
The filtration system utilizes two-stage filtration consisting of a 180µm basket and a 25µm foam filter to capture finer particles. The filtration flow rate reaches 14m³/h. This allows the system to capture debris of various sizes in a single cleaning cycle. The removable filter basket also simplifies subsequent maintenance and cleaning.
Intelligent sensors
A suite of advanced sensors guides underwater navigation. The robot utilises gyroscope, infrared, depth, and sonar sensors to orient itself and navigate the pool. This sensor system supports efficient guidance over the cleaned surfaces. The robot uses three different paths for cleaning the floor and three paths for cleaning the walls. The pool must be at least 3m deep for correct operation.
Mobile app settings
Connecting to the Wybot mobile app offers a choice of 7 cleaning modes. You can configure paths and modes using the phone interface or the button on the device body. There is also an underwater remote control and a weekly timer for scheduling maintenance. An LED indicator on the body displays the current battery level during operation. Software updates take place wirelessly using OTA technology.
Three integrated motors
Three independent motors with a total output of 90W provide movement and suction. The motors enable the cleaner to move at a speed of 10m/min and climb pool walls. Weighing 8.5kg, the device cleans the floor, walls, and waterline. A hook included in the package makes it easy to pull the cleaner out of the pool.
Package contents:
WYBOT pool cleaner, charger, hook
Type:
Automatic
Suitable for:
In-ground pools
Maximum recommended pool size:
50m²
Max. pool depth:
3m
Power:
90W
Filtration system:
Basket
Filtration flow rate:
14m³/h
Filtration efficiency:
25µm
Specifications
Power Supply
Type
Suitable for
Features
Filtration
Dimensions and weight
Packaging
| Code: | WYBhob013 |
| Warranty: | 24 months |
| Manufacturer information |
Vágner Pool s.r.o., Nad Safinou II 348, 25250 Vestec, [email protected] |