Archive - Work Tools

Mixer for construction mixtures - one-dimensional, with power 1600 W, mixing whisk with diameter 140 mm and length 590 mm, weighs 5,5 kg

Jigsaw - AKU, 2500 oscillations per minute, with a maximum cutting depth of 70 mm, changing the blade without tools, adjustable cutting angle and adjustable speed, weight 1.6 kg, 3...

Hedge Shears - Accu, two-sided, length 510 mm, bar length 510 mm, maximum cutting diameter 16 mm, blade pitch 16 mm, swivel handle, weight 2800 g, safety fuse, without battery

Cordless Drill

Pruning Shears - single-bladed, max. cutting diameter 37 mm

Pruning Shears - single-bladed, max. cutting diameter 25 mm

Pilník

Pilník

Pilník

Demolition Hammer - with mechanical hammering, power input 1700 W, chuck SDS Hex, 1800 impact rate per minute, impact energy 50 J, weight 18,37 kg

Angle Grinder - power input 1200 W, disc diameter 125 mm, max. speed 12000 rev/min, speed control and additional handle

Angle Grinder - cordless, disc diameter 125 mm, max. speed 8000 rev/min, additional handle, requires battery with 20 V voltage, weight 1.6 kg, service key and protective cover...

Mixer for construction mixtures - one-dimensional, with power 1600 W, mixing whisk with diameter 160 mm and length 600 mm, weighs 4,3 kg

Cordless Drill with hammer, 20 V, maximum torque: 30 Nm, chuck range: 10 mm, with carrying case

Cordless Drill without hammer, 20 V, maximum torque: 40 Nm, chuck range: 13 mm, without battery

Cordless Drill without hammer, 20 V, maximum torque: 30 Nm, chuck range: 10 mm, without battery

Impact Wrench aku, mounting type: hexagon socket 1/4", 2800 rev/min, 100 Nm torque

Compact Chainsaw - cutting speed 8 m/s, length of cut 10 cm, length of the bar 10 cm, chain pitch 0.325", guide rail groove width 1.1 mm, on 12 V Li-Ion battery (not included),...

Circular Saw - battery power,, no-load speed: 5000 rev/min, cutting depth up to 70mm, saw blade diameter: 30mm, transport case included in the package

Circular Saw - cordless, manual, suitable for wood and metal, up to 4700 rev/min, max. cutting depth at 90° 55 mm, 50° cutting angle, features: ergonomic handle, dust extraction...

Impact Wrench aku, mounting type: impact joint 1/2", 2900 rev/min, 300 Nm torque

SDS-Plus Rotary Hammer Drill - with pneumatic hammering, chuck SDS Plus, 900 rev/min rated speed, 5000 impact rate per minute, impact energy 1,2 J, weight 1,53 kg

Cordless Drill without hammer, 18 V, maximum torque: 140 Nm, motor type: carbonless, chuck range: 13 mm

Angle Grinder - cordless, disc diameter 125 mm, max. speed 8500 rev/min, additional handle and antivibration handle, requires battery with a battery capacity 4 Ah and 20 V...