Archive - Construction Site Equipment

Cutting Disc cutting wheel bearing, 22x6x5mm, cutting wheel with bearing for more accurate and easier cutting, of sintered carbide with titanium coating, which increases its...

Tile Cutter manual, max. length of straight cut is 1000 mm, max. cutting depth 16 mm, ruler, protractor and millimetre scale

Floor Tile Cutter manual, max. length of straight cut is 800 mm, max. cutting depth 16 mm, ruler, protractor and millimetre scale

Floor Tile Cutter manual, max. length of straight cut is 600 mm, max. cutting depth 16 mm, ruler, protractor and millimetre scale

Impact Wrench aku, mounting type: impact joint 1/2", 2200 RPM, 250 Nm torque

Impact Wrench aku, mounting type: impact joint 1/2", 2200 RPM, 250 Nm torque

Circular Saw - electric power, 1400W, no-load speed: 4500 RPM, cutting depth up to 63mm, saw blade diameter: 185mm, weight: 5,1kg

Plane aku, planing width 60 mm, 10000 RPM, 20 V, 2 Ah, number of accumulators in pack - without battery, clamping width 1,25 mm

Plane electric, planing width 60 mm, 10000 RPM, 20 V, 2 Ah, number of accumulators in pack - 1, clamping width 1,25 mm

Tool Set - Promotion 55 accessory set - workshop, Includes: 626728000 set of drills in rolling bag “SP“ 13 parts, 626700000 set of bits promotion SP 32 parts, 623599000 sets of saw...

Cordless Drill with hammer,, maximum torque: 48 Nm, chuck range: 10 mm, with carrying case

Cordless Screwdriver 12 V, 2 Ah, max. spinning moment 17 Nm, includes batteries

Gas Burner - for bottles, max. pressure 1,2 bar, hose length 3 m

Gas Burner - for bottles, max. pressure 1,2 bar, hose length 3 m

Gas Burner - for bottles, power regulation

Gas Burner - for bottles, max. pressure 1,2 bar, hose length 3 m

Gas Burner - for bottles, max. pressure 1,2 bar

Concrete Mixer -

Angle Grinder battery, 18V, max. 10000 rpm, weight 2 kg, suitable for use with 125 mm disc with M14 handle, suitable spare batteries 2 Ah (YT-82842), 3 Ah (YT-82843) and 4 Ah...

Cordless Drill with hammer, 18 V, maximum torque: 40 Nm, chuck range: 13 mm, without battery

Chainsaw - battery, 35 cm bar length, oil tank volume 170 ml, automatic chain lubrication, ergonomic handle, Li-Ion battery with capacity 2 Ah, battery, charger and strip cover...

SDS-Plus Rotary Hammer Drill - chuck SDS Plus, 1850 rev/min rated speed, 4800 impact rate per minute, impact energy 2 J, weight 5,83 kg

SDS-Plus Rotary Hammer Drill - with mechanical hammering, power input 1050 W, 2800 RPM rated speed, 4800 impact rate per minute

Voltage Tester - induction, detection range: 90-1000V, higher safety by eliminating contact with the measured cable, adjustable sensitivity allows to detect live conductors even in...