Rust-Oleum Fillcoat Waterproof flexible elastic sealant, RO.25. ZWA.1

Rust-Oleum Fillcoat Waterproof flexible elastic sealant, RO.25. ZWA.1
Rust-Oleum impregnator RO.25. ZWA.1 is waterproof, elastic repair coating for roofs, uninvited terraces, eaves, ridges, chimneys, pipes, etc. Repaintable with Dacfill, PRT or Dacfill HZ. Practical consumption depends on many factors such as porosity, substrate roughness and material loss during application. To ensure homogeneity of the coating, the product must be thoroughly mixed before application. Can be used in all weather conditions except snow. Do not apply to polystyrene insulation or new concrete (concrete should be at least 2 years old). Fillcoat can also be used as a primer under Dac Hydro Alu.

Key features of Rust-Oleum Fillcoat RO.25 waterproof flexible sealant. ZWA.1
- Strong elastic waterproof layer
- Excellent adhesion to various substrates
- Can be used in all weather conditions
- Repaintable
- Thorough mixing before use
- Cannot be applied on polystyrene insulation, on new concrete (concrete must be min. 2 years)
- It also serves as a primer
- Consumption dependent on the substrate
Surface treatment
Carefully remove dust, mud, grease, moss and dead leaves. The areas to be repaired are cleaned with a hard broom and sponge. After cleaning, Fillcoat can be applied directly to asphalt substrates, hard PVC, polyester, zinc, aluminium, glass, tile, etc. Fillcoat can be applied in all weather conditions, even under water, except for porous substrates. Porous materials (concrete, stone, wood) must first be dried and pre-treated with Primer 44HS. In the case of repeatedly repaired leaks, exposed or otherwise critical areas, the Fillcoat, not containing fiberglass, must be reinforced with Dacfill-fleece: Apply Fillcoat (approx. 1 l/m²), unroll and lay Dacfill-fleece on top and immediately cover with another coat of Fillcoat.

Application and dilution:
Brush/roller/Airless application: undiluted
Air gun application: not recommended
Technical specifications:
Density: 1,05
Degree of gloss: polish
Dry matter content by volume: 43 %
Dry weight content: 52 %
Drying at 20 °C/RH: 50 %
Repaintable after: 3 - 14 days with the same product/after 6 weeks with a different colour
Recommended wet layer: 1000 µm
Recommended dry layer: 430 µm
Theoretical consumption: 1 coat 1 - 1.5 l/m²
App: in 2 layers, in combination with Dacfill-fleece
Pollution: thinner 22 or technical gasoline
Product VOC: 485 g/l
VOC mixtures: 485 g/l
VOC categories: A/i
VOC limit: 500 g/l
Flash point: 40 °C
Use: Exterior
It's gushing: 18 × 23 / Pressure: 220 bar
Safety notice:
The safety data sheet and safety information are printed on the can
Storage:
5 years from the date of manufacture in unopened containers if stored in dry, well-ventilated areas, not in direct sunlight at temperatures between 5 °C and 35 °C.
Specifications
Usage
Features
Packaging
| Code: | RUSimp0030 |
| Warranty: | 24 months |