PPG Primalex thin-coat glaze 3in1 cedar libanon, 5 l
PPG Primalex thin-coat glaze 3in1 cedar libanon, 5 l
Primalex 3-in-1 wood stain is designed for protective and decorative coats on exterior wooden surfaces, such as fences, pergolas, cladding, windows and doors. It combines impregnation, a base coat and a final wood stain, eliminating the need for other products. It soaks deep into the wood's structure, giving it protection against UV radiation and moisture. Its thin-layer formula enhances the natural grain of the wood. Once dry, it leaves a matte surface that does not crack or peel. You can easily apply the wood stain with a brush.
Key features of the Primalex 3-in-1 thin-layer wood stain in cedar of Lebanon
- Designed for exterior use
- Suitable for fences, pergolas, cladding, windows and doors
- Combines impregnation, a base coat and a wood stain
- Protects wood from UV radiation, mould, rot and pests
- Creates a matte finish in a cedar of Lebanon shade when dry
- Enhances the natural wood grain, does not crack or peel
- Two coats recommended
- Drying time before the next coat is approximately 12 hours
- Theoretical coverage of 15m²/L
- Package volume of 5L
Application and coverage
The wood stain needs to be applied to a clean and dry surface, free of dirt and old coats. Two coats are recommended for an optimal result. One litre treats approximately 15m² of surface area in a single layer, but the final consumption also depends on the absorbency and type of wood. The entire 5-litre package is therefore enough for roughly 75m² of coating. A major advantage is that subsequent surface treatment is possible without the need for prior sanding.
Specifications
Type
Colour
Technical parameters
Features
Packaging
| Code: | PPGlaz035 |
| Warranty: | 24 months |
| Manufacturer information |
PPG Deco Czech a.s., Břasy 223, 338 24 Břasy, 800 101 000, [email protected] 
|