PATTEX Repair Extreme Universal Flextec 8 g

PATTEX Repair Extreme Univerzál Flextec is a universal, single-component adhesive based on FLEXTEC polymer, which contains no volatile solvents. It is suitable for indoor and outdoor use for bonding absorbent and non-absorbent materials such as wood, metal, glass, ceramics, rubber, leather, stone, mirrors and plastics. The adhesive is resistant to water and high temperatures. It creates a very strong and flexible bond with a strength of 2.5kg/cm², which is also resistant to shocks and impacts. PATTEX Repair Extreme Univerzál Flextec offers truly universal use.

Instructions for Use:
The surface must be clean, dry and free of dust and grease. On non-absorbent surfaces, apply a thin layer of adhesive to only one of the surfaces being bonded; on absorbent surfaces, apply the adhesive to both surfaces. Adjust the amount of adhesive according to the absorbency of the surface – the more absorbent the surface, the more adhesive is needed. Immediately after applying the adhesive, fix the bonded surfaces for at least 30 minutes, applying even pressure over the entire area of the bond. The strength of the bond depends on the pressure applied, not the duration of the pressure. Final strength is achieved after 24 hours. Remove any excess adhesive immediately with a damp cloth. Once cured, the material can only be removed mechanically.

Weight:
8g
Warning:
Not recommended for bonding PP, PE, PTFE (Teflon®) and glass that is exposed to UV radiation and permanent moisture.