MARIMEX Well Mineral 1l

MARIMEX pool chemistry to stabilize well water with a high mineral content, prevents the formation of mineral deposits on the walls and bottom of the pool. The product is particularly suitable for stabilizing problem minerals such as iron, copper, manganese and calcium. The active substance binds to the problem minerals and prevents their side effects, such as. possible brown colouration of water due to oxidation of iron ions after chlorination of untreated well water. If the pool is filled with hard or otherwise mineralised water (usually well water), mineral deposits will form. These deposits are easily covered by various impurities, which then form a breeding ground for bacteria and algae. The product is suitable for combination with chlorine and chlorine-free chemistry, fresh and salt water pools.

Use:
Apply the product directly into the skimmer or on the free water surface while the filtration is running. For proper effect, use the Brightener no sooner than 24 hours after adding the Well Mineral. The simultaneous use of these preparations reduces the effectiveness.
Dosing:
For optimum effect, the pH of the water must first be adjusted to approx. 6.8-7.2. The product works best when added to freshly infused water before it is first chlorinated. The first treatment is recommended at the earliest 24 hours after the application of Studna Mineral. The initial dose is 250 ml per 10 m³ of pool water. If you know that the source water for your pool is very hard or contains elevated levels of problem minerals (iron, manganese, etc. ), increase the initial dose up to 750 ml per 10 m³ of pool water. Always add 30ml / 1 m³ of water to the skimmer when the filtration is switched on. For swimming pools, a water hardness of 160-240 mg/l in the form of CaCO3 is most suitable.