MARIMEX Swimming pool with ORLANDO construction including skimmer 3,66 x 0,91m - grey
MARIMEX Swimming pool with ORLANDO construction including skimmer 3,66 x 0,91m - grey
With the Orlando pool you can enjoy swimming all year round without having to worry about complicated storage. This pool does not need to be dismantled at the end of the swimming season. All you need to do is to winterise properly, which will save you not only time but also water costs. Thanks to the winterisation method, where more than 80% of the water remains in the water, you avoid refilling it at the beginning of the next season. In addition to easy maintenance, you will be pleased with the stable construction of the Orlando pool. With galvanised steel walls and a wide water surface, this pool is not only durable but also very easy to operate. Preparation for water filling takes a maximum of 120 minutes. The pool liner is frost resistant and can be easily replaced if damaged. If you want to extend the life of the pool, it is recommended to cover the pool with a cover after each use.
Above Ground
Type
With steel wall
Version
8 000 litres
Volume
Without filtration
Filtration
Key features of the swimming pool with MARIMEX ORLANDO construction including skimmer 3,66 × 0,91m - grey
- Easy winterization without disassembly, saves time and water
- Solution with more than 80% water reuse
- Stable and durable construction with galvanised steel walls
- Quick preparation for water filling, up to 120 minutes
- Replaceable pool liner that is frost resistant
Expansion options for an even better experience
You can connect both cartridge and sand filtration to the Orlando pool. For easy connection of the filtration system, there are special passages in the pool wall to which the Olympic skimmer and 32 mm (5/4") hoses can be connected. For more efficient and faster filtration, it is recommended to choose sand filtration, which ensures better water purity and quality.
Orlando is also suitable for in-ground installation
The Orlando can be partially or completely sunk into the ground, giving it an elegant look and saving space in the garden. However, all construction recommendations and specifications for recessing must be followed for safe and comfortable use. The pool must be placed on firm, vegetated ground, not on a loaded surface. Before embedding, it is important to check the groundwater level at the construction site and remove it if necessary. During flushing, emphasis is also placed on the correct placement of filtration and other accessories.
Proper storage of the Orlando pool
Orlando pools are designed to stay built all year round, without the need for annual dismantling and cleaning. However, it is essential to carry out a proper winterization after the end of the bathing season. First, drain the water so that the level drops approximately 10 cm below the skimmer and close the return nozzle with the stopper. Next, disconnect the filtration and accessories, and don't forget to apply winterizing chemicals. If you are unable to disconnect the hoses, lower the water level 10 cm below the return nozzle. Afterwards, the hoses must be drained of water to prevent them from being destroyed by frost. It is strongly recommended not to drain the entire pool and not to remove the pool liner from the structure. Otherwise, the pool could accidentally collapse and be damaged.
Orlando pool package components
- Orlando pool (steel wall, foil and rails)
- Instructions
- Minor installation material required to build the pool (rails, connectors, etc. )
Technical parameters
- Pool diameter 3,66 m
- Pool height 0,91 m
- Water depth 0.8 m
- Weight 41 kg
- 1 package 91 × 38 × 38 cm
Specifications
Type
Features
Dimensions
Equipment
Filtration
Volume
| Code: | MARMX012 |
| Warranty: | 24 months |
| Manufacturer information |
Marimex CZ s.r.o., Libušská 221/264a, Libuš, 142 00 Praha 4, [email protected] 
|