MARIMEX Pool Chemistry SPA STUDNA 0,6l

MARIMEX SPA STUDNA is a preparation designed to stabilize well water with a high mineral content. It prevents mineral deposits from forming on the walls and bottom of the whirlpool and helps stabilize minerals such as iron, copper, manganese and calcium. Thanks to its composition, it binds problematic minerals, thus preventing their undesirable effects, such as discolouration of water due to oxidation of iron ions. The product is particularly suitable for whirlpools filled with hard or otherwise mineralised water.

Brand Marimex

Marimex swimming pool disinfection products are developed, manufactured and packaged in the Czech Republic, while the origin of the raw materials is carefully controlled and the processing process is monitored. For more than 25 years, the company has been making sure that the water in swimming pools is safe and clean. The workmanship and effectiveness of the products is proven not only by experts, but also by many satisfied users. A wide range of chlorine and non-chlorine chemistry ensures comprehensive care of the pool water throughout the swimming season while effectively preventing algae or turbidity.

Use:
Apply the product on the free water surface with the filtration on. For proper effectiveness, use the Brightener Brightener no sooner than 24 hours after adding the Well Mineral, as their simultaneous use reduces effectiveness.
Dosage:
For optimum effect, first adjust the pH of the water to 6.8-7.2. The product works best when applied to freshly infused water before it is chlorinated for the first time. The first chlorination is recommended no sooner than 24 hours after using Studna Mineral. The initial dose is 25 ml per 1 m³ of water in the whirlpool. If you know that the source water is very hard or contains elevated levels of problem minerals (iron, manganese, etc. ), increase the initial dose up to 75 ml per 1 m³ of water. Add 30 ml per 1 m³ of water each time fresh water is added with the filtration switched on. For whirlpools, a water hardness of 160-240 mg/l in the form of CaCO₃ is most suitable.
Warning:
Do not mix with other chemicals in concentrated form. Do not use the product to treat water in wells! It is designed exclusively for whirlpools. When using the product simultaneously with the Brightener, keep a minimum of 24 hours apart, otherwise the effectiveness will be reduced. The manufacturer is not liable for any damage caused by improper use of the product.