Cordes CC-4000

Peak electrochemical sensor of carbon monoxide in the air

This stand-positioned detector uses superior electrochemical sensor and the CO concentration in the ambient air using an LCD display. When selecting a location detector, make sure that you hear the triggered alarm in every room. If in your house you are placing only one CO detector, install it near bedrooms, and not, for example, in the basement or boiler room. Recommended height of the detector at least 1.8 meters above the floor. The detector is useful to test approximately once per week.

Key Features

• Detection of CO
• High-quality sensor Figaro life of up to 7 years
• Powered by three AA batteries, signaling discharge
• Digital display, test button
• Easy installation

Terms of use

• Dust, grease and chemicals used in the home can reduce the functioning of the sensor
• Do not place the detector in damp and wet locations such as bathrooms
• Avoid spraying aerosols near the CO detector
• Do not place the detector in a place where the temperature falls below -10 ° C or exceeds +40 ° C.
• Do not place the detector behind curtains or furniture, but Wall
• Carbon monoxide must be able to penetrate to the sensor, so that he could record the detector

Specifications:

Frequency alarm at a concentration
More than 50 ppm: 80 minutes
More than 100 ppm: 30 minutes
More than 200 ppm alarm can not be switched off
Displayed concentration
From 20 to 600 ppm
At concentrations greater than 600 ppm, the display blinks
Current consumption
Standby: <20 microamps
When the alarm: <45 mA
Alarm Volume
85 dB at 1 m