BISON POLY MAX High Tack Express 425g

Highly durable assembly adhesive BISON POLY MAX high tack express weighing 425 g is ideal for interiors and exteriors. The adhesive excels in high initial adhesion and resistance to temperatures from -40 to 100 ° C. It is designed for joining all types of materials, including absorbent and non-absorbent. The adhesive creates a flexible type of joint, is odorless and resistant to UV radiation. It has water-repellent effects, is easy to apply and does not shrink.

Key properties of BISON POLY MAX high tack express 425 g

• BISON POLY MAX assembly adhesive for flexible type of connection with high strength
• Can be used on all types of materials
• High resistance to humidity, UV radiation and different temperatures
• Water repellent and odorless effects
• Easy application and fast onset of action
• High initial adhesion

Mass:
425 g

Instructions for use:
Bonding and fixing: Bonded surfaces must be dry and dust-free. Apply the adhesive 1-sided in dots or strips and press together or tap with a rubber mallet. If necessary, fix heavier materials for 10 minutes. For very heavy materials, fix the glued parts for 4 hours. The joint reaches full strength after 4 hours (condition: at least one material must be absorbent - for non-absorbent materials, the final time is reached after a longer time). Glued parts can be corrected for a few minutes. The minimum working temperature is 5 ° C. Uncured adhesive can be removed with a wet cloth. Store in a cool and dry place, the glue must not freeze.
Seal: Apply the sealant evenly to the joints. Smooth with a damp (lemon-free detergent water) within 10 minutes with a spatula, spatula or finger. Seal vertical joints from the bottom up. The surface is dry in about 15 minutes. Complete curing occurs after a few days (depending on the thickness) - the curing speed is approximately 2 mm / 24 hours.