Iget SECURITY M3P16 - wireless 230 V socket

The wirelessly controlled 230V socket for the iGET SECURITY M3 security system boasts a timer and on/off features. It can be controlled via the iGET SECURITY application. Set the socket to activate or deactivate in different situations such as when an alarm is triggered, depending on temperature or at preset times. This could be used to switch on a light, the heating, fans or many other appliances.

Modes:

• Event - e.g. The socket turns on/off when the alarm is activated/deactivated
• Accessories - if an accessory sends a signal, the socket turns on/off
• Timer - it is possible to set 4 timed groups with separate on/off times and repeat the setting each day, week, or on specific dates
• Temperature - if the temperature goes lower or higher than a set range, the socket switches on/off

Examples of use:

• Switch the light on when the alarm goes off to frighten a burglar.
• If the temperature drops below a certain level the socket can power your heater to bring the temperature back up again.
• and many others...

Additional information:
Transmission Frequency:
433.29MHz
Signal range to the central unit:
Up to 200m in direct visibility
Operating temperature:
-20°C ~ +50°C
Operating humidity:
5% ~ 90% (non-condensing)
Power voltage:
220V ~ 250V, 50 ~ 60Hz, max. 10A
Max. power of connected equipment
2500W
Dimensions:
108 × 70 × 60mm
Weight:
124g