FIBARO Smart Implant

Fibaro Smart Implant allows the connection of binary or analog sensors. DS18B20 temperature sensors or DHT22 humidity and temperature sensors. This connection then provides a report of the measured values to the Z-Wave or Z-Wave Plus control unit. In addition to connecting sensors, the device can be easily controlled by closing / opening the output contacts (independent of the inputs). This unit works simultaneously as a signal repeater and supports S0 encryption with AES-128 and S2 authentication. The Fibaro Smart Implant also includes an integrated temperature sensor.

Key features of the Fibaro Smart Implant unit

• Miniature dimensions
• Two inputs + two outputs
• Z-Wave and Z-Wave Plus
• Inspection and control of equipment
• Up to 12 possible actions attributed to the scenario
• Integrated temperature sensor

Additional information:
Supports sensors:
6 × DS18B20
1 × DHT
2 × 2-wire analog
2 × 3-wire analog
2 × binary
Power supply:
9-30 V DC ± 10%
Inputs:
2 × 0–10 V or digital inputs
Outputs:
2 × potential-free outputs
Maximum current at outputs:
150 mA
Maximum output voltage:
30 V DC / 20 V AC ± 5%
Radio protocol:
Z-Wave (500 series chip)
Radio frequency:
868.4 or 869.8 MHz EU
Radio transmission power:
max. 7 dBm (EIRP)
Range:
up to 50 m outdoors, up to 40 m (depending on the terrain and construction of the building)
Dimension:
29 × 18 × 13 mm