FIBARO Single Switch 2, Z-Wave Plus
Price Guarantee
FIBARO Single Switch 2, Z-Wave Plus
Single & Double
New Generation Wireless Switch Module
General Information
Fibaro Switch 2 is available in two versions (Single and Double). It is used to turn on/off and monitor electrical equipment. Due to its small size, it can be used in connection boxes or inside the device itself. It communicates with it through the Z-Wave network or as a switch.
Key Features
- Built-in switching mechanism
- Communication and security protocol
- Configuration menu with a signal LED
- Chip generation Z-Wave 500
- Z-Wave Plus protocol
- Measures consumption of connected devices
- Supported Security (Z-Wave Network Security)
AES-128 Encryption
Technical Data
Fully compatible certified device (FCC, DEKRA, Z-Wave)
- Power supply: 100 - 240V AC, 50/60Hz
- Single Switch 2 (FGS - 213)
USA (120V) 6.5A
UE (240V) 8A
- Double Switch 2 (FGS - 223)
USA (120V) 6.5A (1 channel)
USA (120V) - total load 9.5A
UE (240V) 6.5A (1 channel)
UE (240V) - total load 10A
Functionality
- Complete control system for each channel
Standard control
Delayed switching on/off of devices
Automatic on/off mode with additional functions
- A complex scene activation system (scene management)
Pressing the button one to three times, or holding it down, can map four different situations
- Very accurate consumption measurement +/-1% for power supply from 5W
- Smart Notification
- More practical connectors
- Z-Wave network coverage tester
Easy Installation
The Single/Double Switch 2 is equipped with enlarged sockets to allow
connection to cables with a larger cross-section and simplify the entire installation process.
User-friendly Configuration
The built-in RGB LED is an excellent assistant during the installation.
It indicates whether Switch 2 has been added or removed from the network.
It also signals calibration or system updates.
Z-Wave Network Tester
Switch 2 can be used to verify signal quality in a Z-Wave network.
The built-in RGB LED light helps you choose the optimal installation location.
?
A Stronger Signal
Single/Double Switch 2 has an increased signal coverage distance,
allowing for better connectivity and more installation options.
Easy Assembly
Place the module in the installation box and connect it to an existing network.
Its miniature size allows you to connect at a convenient location.
Scene Management
With the connected Switch 2, the set scene can be started, together with pressing the light switch.
Smart Notification
The module can monitor voltage drops, overheating or overvoltage. If it records
invalid values, it will send you a device status notification.
Notification about Inactive Devices
If you forget to turn them off, the system will send you a warning message.
It even allows the active device to be turned off remotely.
Automatic Flood Protection
the Switch module will protect your property and prevent water leakage. Of course, you will get a fault notification.
Energy Usage Tracking
You can set the lower and upper limits of power consumption for your devices. In case the device exceeds the set values, the module can be disconnected.
Measurement of Power and Energy
of the use of electricity and
you can use this information to reduce costs.
Smart Device As a Controller
Children Are Taken Care Of
Safety First
Remote Control
Unlimited Imagination
circuits with a maximum power input of 2.5kW. Z-Wave Plus protocol and Z-Wave 500 chip offer energy monitoring, allowing you to reduce the cost of the electricity consumed.
Specifications
Use
Connectivity
Connection
Operation
Features
| Code: | FIBR03k |
| Warranty: | 24 months |
| Product Number: | FIB-FGS-213-ZW5 |
| Links: | Producer's Website: |