Fibaro Roller Shutter 3 is a wireless module for controlling motorized blinds, shutters, awnings and gates. This driver is compatible with any Z-Wave Plus driver, plus it offers compact dimensions and improved software for easier installation and better compatibility with all types of electric motors. Another practical feature of the Fibaro Roller Shutter 3 is the ability to measure power consumption. The controller can be synchronized with the Weather plugin, thanks to which the degree of closing of blinds and shutters can be adjusted depending on external weather conditions. This will help you reach the right temperature in the house and also reduce your heating or air conditioning costs.
Advanced calibration technology modulu zajišťuje, že zařízení bude vždy přesně detekovat polohu a stav rolet či vrat. A well-performed calibration prevents poor detection of the open / close state. You will even be able to find out the exact opening / closing angle of the blinds through the mobile application. Roller Shutter 3 supports up to 5 different modes that allow you to precisely adjust exactly to your needs.
Additional information:
Power supply:
100–240 V ~ 50/60 Hz
Rated load current:
4.2 A for luminaires and resistive loads, 1.7 A for motors with compensated power factor (inductive load)
Supported engine types:
single-phase AC motors
Stop mechanisms:
electronic and mechanical
Consumption:
up to 0.8 W
Operating temperature:
0-35 ° C
Active element:
microrelay switch µ
For installation in el. boxes:
O = 50 mm, depth? 60 mm
Radio protocol:
Z-Wave (500 series chips)
Radio signal:
up to 5 dBm
Frequency band:
868.4 MHz
Range:
up to 50 m outside
up to 40 m inside
External dimensions:
42.5 × 38.25 × 20.3 mm
Code: | Fibr08 |
Warranty: | 24 months |
Product Number: | FGR-223 |
Links: | Producer's Website: |