Evercon AH-707 Home Amplifier 30 dB for 4 - 8 TVs
62.90 €
Evercon AH-707 Home Amplifier 30 dB for 4 - 8 TVs
Key features of the Evercon AH-707 Antenna Amplifier
- Designed for antenna systems in new bungalow buildings or reconstruction of older antenna systems
- It is ready for 2 UHF TV antennas in the 470-694 MHz band, i.e. channels 21 - 48, it is also possible to connect VHF, DAB or VHF antenna
- All inputs have gain control so that signals can be received from two transmitters at different distances
- The UHF1 and UHF2 inputs also have the ability to trigger 12V for preamplifiers in antennas up to a max gain of 15 dB
- The amplifier is equipped with a unique DUAL POWER power supply system - where the amplifier can be powered either by the included 12V DC adapter or remotely via a coaxial cable up to 40 m if there is no 230 V at the installation site.
- Unused outputs can be fitted with 75 Ohm termination resistors
- Wall or beam mounting with 4 screws
- The number of outlets 8 does not mean that the building must have 8 TVs - if there is no final plan where the TVs will be installed, we recommend 2 outlets in opposite corners of the room
Technical parameters
- Input impedance : 75 Ohm
- Number of inputs : 2x UHF, 1x VHF-FM-DAB
- Number of outputs : 8
- Power supply : 12 V DC - via coaxial cable or directly via DC adapter 230/12V
- DC power connector diameter : 5,5/2,1 mm plus pole in the middle
- Possibility of grounding: yes - GND terminal
- Gain of UHF inputs : 30 dB
- Gain of VHF-FM-DAB input : 30 dB
- Profit regulation: yes 15 - 30 dB
- Noise figure : 3.75 dB
- Minimum input level : 29 dBuV
- Maximum input level : 60 dBuV
- Maximum output level : 90 dBuV
- Design: Inner IP 21
Package contents
- Antenna amplifier Evercon AH-707
- Power supply 12V DC
- 11x F connector 6.5 mm screw-on
Whole description
Specifications
Type
Type
Amplifier
Type
Active
| Code: | MCaaa0033 |
| Warranty: | 24 months |