ELIZ EURO 50 X

The ELÍZ EURO 50 X electric pressure water heater with a volume of 50 litres is suitable for one or more points of use. It is designed for horizontal wall mounting. Water outlets are on the left side. The ELÍZ water heaters stand out not only for their functionality, efficiency and quality of workmanship, but above all for their low energy consumption and high performance. They meet the demanding criteria of the Directive on the efficiency and energy consumption of water heating equipment.

Long service life and corrosion protection

The heater tank is made of high quality steel protected by a layer of zirconium enamel. High-quality CFC-free polyurethane insulation with a thickness of 33 mm guarantees low heat loss and savings in water heating costs. Using the thermostat on the control panel, you can set the water temperature in the range of 7-75 °C, with the option of setting the ECO mode. When set in ECO mode, the water is heated to an optimum temperature of 55 °C, with reduced heat loss and lower energy consumption. The minimum thermostat value serves as protection against water freezing in the heater. The heater has 2 built-in anode rods, which guarantees effective protection of the tank against corrosion and significantly prolongs its service life. A switch with a heater light is used to switch the heater on/off in our absence, which allows energy saving.
Additional information:
Voltage:
230V
Insurance:
10 A
Electrical protection:
IP 24
Water heating time from 12 °C to 65 °C:
1,6 h
Thermal losses:
1.13 kWh/24h
Energy efficiency class:
C
Insulation thickness:
33mm
Water connection:
G 1/2''
Maximum water pressure:
6 bar
Weight:
19 kg