Edimax EW-7209APg

Multifunction access point combining wireless standards compatible with the 802ndOn the 11th and 802nd11st and function of the bridge.The device offers a transmission speed to 54 Mbit / s and in the case of obstacles or interference can automatically switch to a lower speed.It also serves as a bridge with the support WDS function, which allows at the same time to use the device as an access point and repeater used to strengthen the signal.Thanks to this feature can create a wireless network in large areas such as schools or hotels.This skill can also make good use in the application of networks between buildings where it is not possible to use a cable connection.Wireless access point also feature a DHCP server and RADIUS server with autentifikací EAP-MD5.
The access point is also equipped with the protection of transmitted data through 64, or 128 to 152-bit encryption key length WEP and WPA encryption method, which added advanced features such as access control using MAC addresses or hiding ESSID.The device is equipped with a connector to connect an external antenna and the whole administration point is controlled through a Web interface.The firmware can be upgraded simply devices through the Internet.
The parameters and specifications:
Processor:
Realtek RTL8186
RF module:
Realtek RTL8285
Outputs:
5th UTP port
The band:
USA (FCC) 11 channels:2.412 GHz - 2.462 GHz
Europe (ETSI) 13 channels:2.412 GHz - 2.472 GHz
Japan (Telec) 14 channels:2.412 GHz - 2.483 GHz
Supported standards:
IEEE 802nd11st
IEEE 802nd11st
Data protection:
WEP encryption 64/128/152
WPA encryption
Control of access through the MAC address
Support ESSID
54 Mbps wireless access point:
It supports most fashion with function WDS client
It has odjímatelnou antenna
Funke DHCP server / client
RADIUS with autentifikací EAP-MD5
Transmission speeds:
54, 48, 36, 24, 18.11, 5.5, 2, 1 Mbps
Antenna:
Detachable RP-SMA
Power:
12 V DC, 1 A
Operating temperature:
0 to 40 degrees
Dimensions:
30 x 187 x 100 mm
Certification:
FCC Class
CE Mark