Disinfection SPURTEX® Unisanol 100ml

Key properties of disinfection of SPURTEX Unisanol nanofiber products

• Disinfection of SPURTEX Unisanol nanofiber products for immediate deactivation of viruses and bacteria
• Effectively eliminates microorganisms from drapes and respirators
• Allows reuse of SPURTEX series filter materials
• The product is also suitable as a disinfectant for hands and other surfaces
• Ethanol based composition
• SPURTEX Unisanol disinfection is developed in cooperation with Tomas Bata University in Zlín

Use:

• Shake the disinfectant bottle well before use. Spray the drape or respirator with disinfectant on the outside and inside. When spraying the material, keep a distance of approx. 15 cm, apply the spraying in an even (no maps on the material) amount over the entire area. Just spray two to three times on each side of the material.
• Do not spray on a respirator or drape if it is worn on the face.
• After thoroughly disinfecting the material, allow the drape or respirator to air dry (ideally for 24 hours to reduce the risk of inhaling residual disinfectant).
• Do not use a dryer to dry the material, as this could mechanically damage the filter layer. Furthermore, increased thermal stress of the material using a microwave oven or hair dryer is not recommended.
• The drape or respirator can be reused after thorough drying. The process can be repeated up to five times (depending on wear) without affecting the filtration functionality of the material.

Warning:
SPURTEX Unisanol disinfection does not affect the functionality of the filter material, but it does affect the aesthetic appearance. With the increasing number of applications of disinfectant to the material, its elasticity is lost.