Coolermaster Hyper 412S

The CoolerMaster Hyper 412S CPU cooler has been designed and optimized to provide highly efficient cooling even at low fan speeds. Because of this, there are wider gaps between fins combined with a modern system of precisely shaped Heat Pipe tubes. In total it offers a quadruple Continuous Direct Contact (CDC) Heat Pipe that is firmly tied to the radiator CPU base. The entire construction works like a virtual steam chamber that effectively dispenses a huge amount of heat into massive aluminum fins. The cooler also has a 120 mm fan, whose speed can be reduced easily with the supplied dampening adapter. On the passive part of the radiator, you can also optionally install up to two fans for trouble-free cooling even at maximum power output. This cooler is compatible with Ivy Bridge processors.
Parameters and Specifications:
Supported Sockets:
Intel: LGA 2011/1366/1156/1155/775
AMD: FM1 / AM3 + / AM3 / AM2 + / AM2
Ventilator:
Speed ??(Standard / Delay Adapter): 1300 rpm ± 10% / 900 rpm ± 10%
Airflow (standard / damping adapter): 52.6 CFM ± 10% / 36.4 CFM 10%
Air pressure (standard / dipped adapter): 1.14 mmH2O / 0.55 mmH2O
Noise (standard / damping adapter): 22.5 dBA / 16.1 dBA
Lifetime: 40,000 hours
Bearings: Sliding with extended life
Rated voltage / current / consumption: 12 VDC / 0.1 A / 1.2 W
Connector: 3-pin
Dimensions: 120 x 120 x 25 mm
Weight: 102 g
Design:
Material: 4 Heat Pipes with direct contact / aluminum fins
Heat Pipe Diameter: 6 mm
Dimensions (passive): 128 x 70 x 160 mm
Dimensions: 132 x 99 x 160 mm
Weight: 507 g