This Axagon adaptor quickly and easily resolves the problem of connecting an older VGA monitor/data projector to a computer with an HDMI output.
It also includes a stereo output for connecting headphones or active loudspeakers.
The built-in microUSB connector for additional power means it won't be a problem to connect devices with a lower HDMI output such as Raspberry Pi, Apple TV, some Smart TV boxes and many more. When connected to a desktop PC or notebook an additional power supply is not needed.
HDMI INPUT • VGA OUTPUT • AUDIO OUT • microUSB POWER CONNECTOR
This hardware connector doesn't need any installation or setup and guarantees high quality image transfer up to FullHD/1080p resolution 1920 x 1080 at 60Hz. The Adapter also supports all lower resolutions.
Both mirroring and extension of the primary monitor area are also supported.
FULL HD / 1080p max. • Mirrored Desktop • Extended Desktop
• Connect the adaptor's HDMI input connector directly to your computer.
• VGA slot to connect VGA cable to a monitor or projector with screws on the cable to ensure a great connection.
• As soon as your computer is turned on, the adaptor is immediately operational. It is not necessary to install any drivers.
• When the display is turned on, input can be adjusted to VGA or D-SUB.
• The image appears on the dislpay device.
• To use the audio output, set HDMI output as the default sound playback device (or install audio drivers from your computer's graphics card).
• If necessary, connect additional power to the adaptor through the microUSB connector. A power supply is not included. However, any mobile phone charger with a USB output can be used.
Input:
Digital HDMI v1.4b
HDMI A (M) male (male)
Exit:
Analogue VGA interface
D-Sub connector 15-pin (F) female (female)
2-channel analogue 16/24-bit output (3.5mm stereo jack) - Stereo output for headphones or active speakers
Parameters of D/A Audio Converter:
Sampling frequency up to 200kHz, 24bit
Signal-to-noise ratio:(Output SNR) > 95dB
Harmonic distortion (Output THD+N) < -85dB
Maximum resolution:
Full HD / 1080p 1920x1080 @ 60Hz
Supported resolutions:
NTSC 480i 480p, PAL 576i/576p, VGA 640 x 480 (4:3), SVGA 800 x 600 (4:3), XGA 1024 x 768 (4:3), XGA + 1152 x 864 1280 x 600, WXGA 1280 x 768 (5:3), WXGA 1280 x 800 (16:10), SXGA - 1280 x 960 (4:3), SXGA 1280 x 1024 (5:4), 1360 x 768, WXGA + 1400 x 1050 (4:3), WXGA+ 1440 x 900 (16:10), HD 1600 x 900 (16: WXGA+ 1680 x 1050 (16:10), Full HD / 1080p/1080i - 1920 x 1080 (16:9), UXGA 1600 x 1200 (4:3), WSXGA+ 1680 x 1050 (16:10), Full HD/1080p/1080i - 1920 x 1080 (16:9)
Other Features:
Supported frequencies 25MHz - 165MHz (depending on the input device).
Supports HDCP protection against image and audio content copying.
Conversion from YCC422 to YCC444.
Supported modes: mirrors the primary monitor area (default setting), expands the primary monitor area.
Power input from HDMI input - no external power is required.
Optional power supply via the microUSB connector if the power level from the HDMI output is lower than the standard level.
Gold-plated connectors for perfect contact and oxidation reduction.
White LED dimly lit to indicate a power connection.
The Explore-Semi EP94Z1E (HDMI-VGA converter) chip + Everest-Semi ES7144LV (stereo D / A converter).
Hardware converter for all operating systems without driver installation.
More information:
Compact dimensions 45 x 47 x 16mm.
Weight 35g, cable length approx. 10cm.
Packaging in cardboard box contains:
HDMI -> VGA active adapter with audio output
Code: | AG200d55b |
Product Number: | RVH-VGA |
Links: | Producer's Website: |