This adapter quickly and easily resolves the problem of connecting an older VGA monitor/data projector to a computer with a HDMI output.
Due to the built-in microUSB connector for additional power, it is not a problem to connect devices with a lower level of HDMI output such as Raspberry Pi, Apple TV, some Smart TV boxes and more. When connecting to a desktop PC or notebook, additional power is not needed.
HDMI INPUT • VGA OUTPUT • microUSB POWER CONNECTOR
A hardware converter, without the need for any installation or setup, ensures high-quality image transfer up to Full HD/1,080p 1,920x1,080 resolution at 60Hz. The adapter also supports all lower resolution.
Both mirroring and extension of the primary monitor area are supported.
FULL HD/1,080p max. • Mirrored Desktop • Extended Desktop
• Connect the input HDMI connector of the converter directly to the computer.
• Connect the VGA cable from the monitor or projector to the VGA output connector of the transmitter, and secure the connection to the converter with the screws on the cable.
• When the computer is turned on, the converter is immediately operational, and no drivers are installed.
• Switch on the display and, if necessary, set the input to VGA or D-SUB.
• The image appears on the display device.
• If necessary, connect additional power to the microUSB connector of the converter. The power supply is not included, but any unused mobile phone charger with USB output can be used.
Input:
digital HDMI v1.4b interface
HDMI A (M) male (male)
Output:
Analogue VGA interface
D-Sub connector 15-pin (F) female (female)
nuts for secure VGA cable securing
Maximum resolution:
Full HD/1,080p 1,920x1,080 @ 60Hz
Supported resolutions:
NTSC 480i/480p, PAL 576i/576p, VGA 640 x 480 (4:3), SVGA 800 x 600 (4:3), XGA 1024 x 768 (4:3), XGA+ 1152 x 864 (4:3), 1280 x 600, HD/WXGA/720p 1280 x 720 (16:9), WXGA 1280 x 768 (5:3), WXGA 1280 x 800 (16:10), SXGA- 1280 x 960 (4:3), SXGA 1280 x 1024 (5:4), 1360 x 768, WXGA 1366 x 768 (16:9), SXGA+ 1400 x 1050 (4:3), WXGA+ 1440 x 900 (16:10), HD+ 1600 x 900 (16:9), UXGA 1600 x 1200 (4:3), WSXGA+ 1680 x 1050 (16:10), Full HD/1080p/1080i - 1920 x 1080 (16:9)
Other Features:
Supported frequencies 25MHz - 165MHz (depending on the input device).
Supports HDCP protection against image and audio content copying.
Conversion from YCC422 to YCC444.
Supported modes: mirroring the primary monitor area (default setting), expanding the primary monitor area.
Power input from HDMI input - no external power is required.
Optional power supply via the microUSB connector if the power level from the HDMI output is lower than the standard level.
Gold-plated connectors for perfect contact and oxidation reduction.
The white LED is dimly lit indicating the power connection.
Used Explore-Semi EP94Z1E chip.
A pure hardware converter for all operating systems without driver installation.
More information:
Compact dimensions 45 x 47 x 16mm.
Weight 34g, cable length approx. 10cm.
Packaging in q cardboard box contains:
HDMI -> VGA active adapter
Code: | AG200d55a |
Product Number: | RVH-VG2 |
Links: | Producer's Website: |