Axago RSI-X1
Don't like the alternatives?
Choose from the full offer
Axago RSI-X1
This adapter will enable you to connect an older IDE drive or ATAPI drive via a SATA interface to a PC.
Due to its bi-directional design, you can also use it to connect a SATA device to an IDE interface on a PC.
The adapter consists of only hardware it does not require any drivers.
Designed for all SATA devices, 3.5" ATA 100/133 drives and 5.25" ATAPI CD/DVD drives.
RUGGED
DESIGN
All the electronics and adapter connectors are well protected by a durable plastic case.
DIRECT
CONNECTION
The compact device has an integrated 40-pin IDE connector that is plugged directly into an IDE port of a PC, disk or drive.
CONNECT
IDE DRIVE
Connect the yellow SATA connector to the SATA motherboard controller and connect the cable from the PC power supply to the 4-pin floppy connector.
You can similarly connect also all standard optical ATAPI CD-ROM, DVD-ROM, CD-RW, combo and DVD-RW drives.
CONNECT
SATA DRIVE
For a connection in the opposite direction, connect the SATA drive with the black SATA connector of the adapter using the included SATA cable.
For proper configuration, you need to set the SATA drive to Master/Slave/Cable Select using two mini switches under the yellow SATA connector.
Input interface:
1x SATA
1x 1x IDE 40-pin (Ultra ATA 133)
Ports:
1x IDE 40-pin (Ultra ATA 133)
1x SATA
1x 4pin floppy (power)
Device support:
3.5" HDD, 5.25" drive
Power supply:
from a computer power supply
Properties:
A 40-pin IDE connector for direct connection to an IDE device or a PC motherboard.
2x data SATA connector - black for connecting to SATA devices, yellow for a SATA PCB motherboard controller.
Supports all SATA and IDE devices including optical ATAPI CD-ROM, DVD-ROM, CD-RW, combo and DVD-RW drives.
Features the Ultra ATA/133 compatible interface, supports all PIO and DMA modes.
Compliant with the Serial ATA 1.0a specification, a maximum theoretical bandwidth of 1.5Gb/sec.
Supports Hot Plug for SATA connectivity.
Switches for SATA Drive Configuration to Master/Slave/Cable Select when connected to an IDE controller.
Powered via a standard 4-pin floppy power supply connector.
The package includes a splitter to simultaneously power an adapter and a drive from one 4-pin Molex PC power connector.
Two LEDs indicating adapter connection and data transfer activities.
With the ATAPI burner, it may be necessary to set the SATA port for IDE emulation.
More information:
Dimensions: 60 x 50 x 12mm
Weight: 21g (without cables)
Supported Operating Systems:
MS Windows all versions, Mac OS all versions, Linux all versions, DOS and all other operating systems.
Note: It is a hardware adapter, no drivers are installed, its compatibility does not dependent on the operating system.
Cardboard box packaging contains:
SATA - IDE bi-directional adapter, data SATA cable, power Y cable (splitter) 4pin Molex male
to 4pin Molex female + 4pin FDD power female and installation instructions in English, Czech, Slovak and Polish.
Specifications
Use
Connection
Dimensions
Use
Male connectors
Connector
Type and number of connectors
Features
| Code: | AG200d6 |
| Product Number: | RSI-X1 |
| Links: | Producer's Website: |