AXAGO EE25-XA ALINE

The compact AXAGO EE25-XA ALINE external box is designed for 2.5" SATA drives. The aluminium box ensures mechanical resistance and excellent heat dissipation, but its brushed aluminium surface also gives it an elegant style. The box has a compact size guaranteed to please any mobile user. Hard drive installation is also very easy and almost automatic, to the point even a complete layman can do it.

High-speed USB 2.0 interface serves to connect the box to your computer, powering the hard drive at the same time. This makes the box ideal for use on the go, as you can use it with your laptop or other mobile devices. The box can be connected while the computer is running, and no drivers are required for commonly used operating systems. A discrete blue LED light keeps you informed about the connection status and hard drive activity.

Input interface:
1 × USB 2.0

Device support:
Ports: 1× SATA
Format: 2.5" HDD, SSD

Power supply:
via USB bus

Properties:

• Fully compatible with USB 2.0, backward compatible with USB 1.1
• Supports transfer speeds of 12/480 Mbit/sec
• Supports 2.5" SATA III/II/I disks with a maximum height of up to 9.5mm, all capacities
• Meets Serial ATA 2.0 specifications (SATA/300), transfer rates up to 3Gb/sec (300MB/sec). 
• Meets Serial ATA 1.0 specifications (SATA/150), transfer rates up to 1.5Gb/sec (150MB/sec)). 
• The overall bandwidth/transmission rate of the box is determined by the used USB 2.0 interface (theoretically 480Mbit/sec)
• Hot Plug support enables you to connect the box while the device is running
• Full plug and play support
• Connection via USB mini B female connector
• USB 2.0 Y cable USB Type A male / USB mini B male, 70cm cable included
• Power supply using USB bus from one USB port is sufficient for most situations
• If necessary, you can boost the power supply capacity from the second USB port using the included Y cable.
• A discrete blue LED light indicates connection status to the computer's USB port (constant light) and data transfer (blinking).

Installing a disk drive is very easy. Connect the disk directly to the SATA connector on the motherboard, insert it into the box body, and attach the front panel with two screws using the provided small screwdriver.

More information:
Compact dimensions 130 × 78 × 12.5mm.
External box weight 77g (without USB cable and disk).

Supported operating systems:
MS Windows XP / Vista / 7 / 8 / 8.1 and later, Windows Server 2003/2008/2012 and later (all 32- and 64-bit versions of Windows OS supported), Mac OS X 10.x and higher, Linux 2.6.x and higher.
Note: Drivers are included with supported operating systems and install completely automatically. No other drivers need to be installed and they are not even available.

Package contains:
external box, USB Y cable length 70cm, mounting screws and screwdriver, multi-language user's guide.