Avide LED strip 24 W/m waterproof warm white 5m

25.72 €

Avide LED strip 24 W/m waterproof warm white 5m

The AVIDE LED strip, with a length of 5 metres, is a solution for both interior and exterior lighting. Thanks to its waterproof design and warm white light, it is suitable for places like under kitchen units, in the bathroom, or for indirect lighting in the living room. It has a supply voltage of 24V, which ensures stable performance and lower losses even over longer distances. The self-adhesive layer on the back of the strip makes installation on smooth, clean surfaces significantly easier.

Key features of the AVIDE 24W/m LED strip

  • Designed for interior and exterior lighting
  • Powered by 24V for stable operation
  • Total luminous flux of 12000lm at 120W
  • Emits a warm white light with a colour temperature of 3000K
  • Colour rendering index (CRI) of 80Ra
  • IP64 rating against dust and splashing water
  • LED lifespan of up to 25000 hours
  • Easy installation with self-adhesive tape on the back
  • Length: 500cm

The advantages of 24V power

This LED strip operates at 24V, which offers several advantages over more common 12V systems. For the same power output, the higher voltage means half the current load on the wires. This results in smaller voltage drops and lower power losses along the entire length of the strip. It makes it possible to power longer continuous sections without a visible drop in brightness at the far end, while also contributing to the efficient operation of the entire lighting system.

Durable construction for reliable operation

The strip's construction is designed for a long lifespan. The protective layer provides an IP64 rating, which means it is completely protected against dust ingress and resistant to splashing water from all directions. This means you can confidently use the strip in environments with increased humidity, such as kitchens or bathrooms, or in outdoor areas where it will not be exposed to direct rain.

Flexible and easy installation

Installing the strip is quick and does not require complex tools. There is a self-adhesive tape on the back that allows it to adhere to surfaces. To ensure optimal cooling and extend the life of the diodes, installation in aluminium profiles is recommended. These not only dissipate heat effectively.

Specifications

Purpose and use

Usage Exterior, Interior

Type and construction

Light Type LED Strip
Mounting method Self-adhesive

Other features

Other features Water resistance design

Dimensions

Lenght 500 cm

Light source

Number of bulbs 600

Voltage and input power

Input voltage 24 V
Power consumption 120 W

Light

Luminous flux 12,000 lm
The colour temperature of light Warm white
Chromaticity 3,000 K

Safety class

Energy Label

Service Life 25,000 h

Connectivity

Power supply Power plug
Code:  AVIzar034
Warranty: 24 months
Links: Producer's Website:
Manufacturer information

Bramcke GmbH,Schoellerstraße 33, 52353 Düren, Spolková republika Německo, [email protected]

Show more