The AVACOM digital camera battery contains only high-quality cells that have high performance and long service life. The battery is equipped with gold-plated connectors and the latest control electronics to prevent oxidation and ensure optimum current flow. They also contain a number of safety features to prevent overcharging, overheating, reverse charging and short-circuiting. An AVACOM battery is not just a good replacement for your original battery, but generally offers greater capacity (and therefore longer life) than the original battery.
The battery is partially charged at the factory but its capacity and performance are initially below 100%, so you should charge it completely before use. To extend the life span of the battery, it is recommended that you repeat the charge and discharge cycle at least 3 times at the beginning. Battery capacity decreases when left permanently plugged into the power supply, so it is recommended that you disconnect the device from time to time. If the battery is not in use, store it fully charged in a dry place and charge it at least once in 6 months.
One of the most common causes of battery degradation is when you completely discharge it and do not use it for a long time. Do not expose the battery to temperatures above 60°C. If the battery is exposed to temperatures below 5°C, charge it only after it has returned to room temperature. Only use the battery in the devices for which it is intended, be careful that it is not subject to a short circuit or too-high discharge current, and protect it from mechanical damage, chemical agents and moisture.
Parameters and Specifications:
Intended for:
Sony
Battery replacement:
SONY: NP-F330, NP-F530, NP-F550, NP-F570, NP-F730, NP-F730, NP-F750, NPF570.CE, NPF770.CE
Type:
Li-Ion
Capacity:
4600mAh
33Wh
Output voltage:
7.2V
Code: | IB893 |
Product Number: | VISO-F750-082 |
Links: | Producer's Website: |