AVACOM camcorder batteries contain only high-quality cells that have high performance and long life. The batteries are equipped with gold-plated connectors and the latest control electronics for trouble-free communication with the device. At the same time, they contain a number of safety features that prevent overcharging, undercharging, over-current charging and short-circuit. AVACOM batteries do not offer only a quality replacement for your original battery - most batteries offer more capacity (and therefore battery life) than the original battery.
The battery is partially charged at the factory, yet its capacity and performance are below 100%. Therefore, for optimal battery formatting, it is recommended to repeat the cycle of full depletion and full charge at least 3 times at the beginning. Battery capacity is reduced when it is permanently connected to the power supply, so we recommend that you disconnect the device from time to time. If the battery is not in use, store it charged in a dry place and check it after approximately six months and charge it.
One of the most common causes of battery degradation is when you put it away fully depleted and do not use it for a long time. Do not expose the battery to temperatures above 60°C. If the battery is exposed to temperatures below 5°C, charge it only when it is at room temperature. Only use the battery in the devices for which it is intended. Also be careful that the battery is not exposed to a short circuit or higher discharge currents. Protect it from mechanical damage, chemical agents and moisture.
Parameters and specifications:
Intended for:
Panasonic
Replacement for:
PANASONIC: HHR-V20, HHR-V211, HHR-V211T/1H, P-V211, P-V211T, VSB0190, VSB0200, VW-VBS10, VW-VBS10E, VBH10E, VP157, BP0200
Type:
Ni-Mh
Capacity:
2100mAh
10Wh
Output voltage:
4.8V
Code: | IB840 |
Product Number: | VIPA-1021-20H |
Links: | Producer's Website: |