AVACOM battery for Aku tools contain only high-quality components that provide high performance and long working life. Batteries are equipped with gold-plated connectors and the latest electronics controls for trouble-free communication with the device. At the same time, they contain a number of safety features that prevent overcharging, low-voltage, over-current charging and short-circuit. AVACOM batteries are not only a good replacement for your original battery - most replacements batteries often offer more capacity (and therefore stamina) than the original battery do.
The battery is partially charged at the factory, yet its capacity and performance are below 100%. Therefore, for optimal battery formatting, it is recommended to repeat the full charge and discharge cycle at least 3 times at the beginning. Battery capacity can be reduced by the permanent connection to the power supply, so we recommend that you disconnect the device from time to time. If the battery is not in use, store it in a dry place and check it every once in approximately six months.
One of the most common causes of battery degradation is when you leave it completely and do not use it for a long time. Do not expose the battery to temperatures above 60°C. If the battery is exposed to temperatures below 5°C, charge it only at room temperature. Only use the battery in the devices for which it is intended. Also be careful that the battery is not subject to a short circuit or higher discharge currents. Protect it from mechanical damage, chemical agents and moisture.
Parametres and Specifications:
Intended for:
Makita BL 1430
Battery replacement:
Makita
Type:
Li-Ion
Capacity:
4000mAh
58Wh
Output voltage:
14.4V
Code: | AVABAa1 |
Product Number: | ATMA-L14A1-20Q |
Links: | Producer's Website: |