AVACOM camcorder batteries contain only high quality cells that have a high-performance and a long service life. Batteries are equipped with gold-plated connectors and the latest control electronics for trouble-free communication with the device. At the same time, they contain a number of safety features that prevent overcharging, low-voltage, over-current charging and short-circuit. AVACOM batteries are a good replacement for your original battery, and most batteries offer more capacity (and therefore a longer life) than the original battery.
The battery is partially charged at the factory, yet its capacity and performance are below 100%. Therefore, for optimal battery formatting, it is recommended to repeat the full charge/discharge cycle at least 3 times at the beginning. The battery capacity reduces with permanent connection to the power supply, so it is sometimes recommended to disconnect the device from the mains. If the battery is not in use, store it in a dry place and check it after approximately six months.
One of the most common causes of battery degradation is when you deplete it completely and then do not use it for a long time. Do not expose the battery to temperatures above 60°C. If the battery is exposed to temperatures below 5°C, charge it only at room temperature. Use the battery only in the devices for which it is intended. Also be careful that the battery is not subject to a short circuit or higher discharge currents. Protect it from mechanical damage, chemical agents and moisture.
Parameters and Specifications:
Intended for:
Panasonic
Battery replacement:
PANASONIC: VW-VBF2, VW-VBF2E, VW-VBF2E/1B, BP-124
Type:
Li-Ion
Capacity:
2000mAh
24Wh
Output voltage:
12V
Code: | IB842 |
Product Number: | VIPA-1250-WP |
Links: | Producer's Website: |